if noone else is gonna open this,
I will, to get the overclocking back into the spotlight of the OverClockersClub!

So, anyone who owns a socket T (775) Machine, get clocking and post your results, just like in the 939 competition! Everyone who enters this will have to list their CPU (Allendale/Conroe/Kentsfield) type of cooling (air, water, phase), and a screenshot of course!

[Edit] The 3DMark competition can be found here!

Categories like in the 939 competition,

Dual SuperPI 1M --> DOWNLOAD SuperPI HERE
Dual SuperPI 32M
OCCT 1 hour Stability Test --> DOWNLOAD OCCT HERE
Suicide Screenshot
Orthos/Dual Prime95 24 hours --> DOWNLOAD ORTHOS HERE / DOWNLOAD PRIME95 HERE

Result Categories:

Green = P4 Prescott/Presler/Smithfield
Blue = Celeron (Conroe-L)
Orange = Conroe (4MB L2 Cache)
Purple = 1333MHz FSB chips
Yellow = Allendale (2MB L2 Cache)
Red = Kentsfield (Quad Cores)
Grey = Pentium E (1MB L2 Cache)
Dark Red = 45nm (Wolfsdale)

SuperPI 1M Single Instance

HITandRUN 5804 MHz E8600 - 07.860s - LN2/DICE?
kitfit1 5502 MHz E8600 - 08.281s - phase
road-runner 5461 MHz E8600 - 08.547s - phase
Rehit 5000 MHz E8600 - 09.328s - air
kitfit1 4904 MHz E8500 - 09.469s - phase
HITandRUN 4878 MHz E8400 - 09.625s - dry ice
weldzilla 4725 MHz E8400 - 09.843s - air
mattwalter85 4590 MHz E8400 - 09.875s - air
road-runner 4703 MHz QX9650 - 09.922s - water
necron66 4644 MHz E8400 - 09.968 - air
Rehit 4634 MHz Xeon E3110 - 10.015s - air
road-runner 4635 MHz Q9650ES - 10.063s - water
gotdamojo06 4500 MHz E8400 - 10.530s - water
RJR 4410 MHz E8400 - 10.639s - air
ccokeman 4402 MHz QX9770 - 10.670s - air
SpeedEuphoria 4320 MHz Q9650 - 10.719s - air
Jammin 4335 MHz E8400 - 10.750s - air
FUZiON 4347 MHz E8400 - 10.835s - air
ebarone 4320 MHz E8400 - 10.920s - air
Compxpert 4304 MHz E8400 - 10.984s - air
gotdamojo06 4250 MHz E8600 - 11.217s - water
Puck 4104 MHz Xeon E3110 - 11.313s - air
Kingfisher 4165 MHz Q9550 - 11.450s - air
Celcius 4005 MHz Q9650 - 11.531s - air
Verran 4651 MHz E7400 - 11.657s - air
gotdamojo06 4515 MHz E6850 - 11.687s - DICE
l33t_p1mp 4000 MHz Q9450 - 11.710s - water
road-runner 4283 MHz E6850 - 11.922s - water
road-runner 4257 MHz Q6600 - 11.922s - water
The_Smith 4500 MHz E7300 - 12.203s - air
ccokeman 4092 MHz E6750 ES - 12.360s - air
firky 4109 MHz E6850 - 12.547s - water
Necron66 4005 MHz Q6600 - 12.625s - air
DLS2008 3680 MHz Q9450 - 12.776s - air
Rehit 4140 MHz QX6800 ES - 12.777s - air
philbrown23 4212 MHz Q6600 - 12.821s - water?
AJW256 4003 MHz Q6600 - 12.907s - air
cirro 4000 MHz Q6600 - 12.922s - air
hardnrg 3915 MHz Q6600 - 13.062s - water
kingdingeling 3906 MHz E6600 - 13.188 - air
The_Smith 4000 MHz E6750 - 13.369s - air
razor 3909 MHz Q6600 - 13.390s - air
Celcius 3748 MHz X6800 ES - 13.641s - air
kingdingeling 3600 MHz Q6600 - 14.313s - air
Celcius 3601 MHz Q6600 - 14.500s - air
Douce2290 3600 MHz E6600 - 15.686s - air
kelm 3585 MHz E6300 - 16.078s - air
Nightwish68 3000 MHz Q6600 - 16.828s - water

SuperPI 32M Single Instance

kitfit1 5301 MHz E8600 - 10m 02.844s - phase
weldzilla 4626 MHz E8400 - 10m 18.359s - water
kitfit1 4750 MHz E8500 - 10m 40.266s - phase
necron66 4500 MHz E8400 - 10m 46.141s - air
Rehit 4500 MHz Xeon E3110 - 11m 24.981s - air
SpeedEuphoria 4320 MHz Q9650 - 11m 42.797s - air
ebarone 4320 MHz E8400 - 11m 45.385s - air
road-runner 4464 MHz QX9650 - 11m 57.344s - water
gotdamojo06 4410 MHz E8400 - 12m 02.920s - water
gotdamojo06 4250 MHz E8600 - 12m 01.609s - water
road-runner 4248 MHz Q6600 - 12m 04.813s - water
Celcius 4005 MHz Q9650 - 12m 15.579s - air
Rehit 4800 MHz E8600 - 12m 18.391s - air
Verran 4567 MHz E7400 - 12m 43.937s - air
philbrown23 4212 MHz Q6600 - 12m 55.047s - water?
Rehit 4005 MHz QX6800 ES - 13m 00.421s - air
DLS2008 3600 MHz Q9450 - 13m 35.165s - air
The_Smith 3440 MHz E6750 - 15m 43.114s - air
Celcius 3501 MHz Q6600 - 16m 02.875s - air
Celcius 3733 MHz X6800 ES - 16m 03.234s - air

OCCT 1 Hour Stability Test

kitfit1 5153 MHz E8600 - phase
kitfit1 4750 MHz E8500 - phase
Rehit 4500 MHz E8600 - air
Verran 4400 MHz E7400 - air
mattwalter85 4302 MHz E8400 - air
gotdamojo06 4300 MHz E8600 - water
kitfit1 4240 MHz E6600 - phase
road-runner 4208 MHz Xeon X3380 - water
ebarone 4203 MHz E8400 - air
road-runner 4200 MHz Pentium D915 - air
road-runner 4104 MHz E6850 - water
gotdamojo06 4100 MHz E8600 - water
road-runner 4050 MHz Q6600 - water
road-runner 4043 MHz QX9650 - water
gotdamojo06 4031 MHz E6850 - water
road-runner 4005 MHz Q6600 - water
road-runner 4005 MHz Q9650 ES - water
gotdamojo06 4005 MHz E8400 - air
firky 3938 MHz E6850 - water
road-runner 3870 MHz E6600 - water
Rehit 3744 MHz QX6800 ES - air
ccokeman 3728 MHz E6700 - air
hardnrg 3681 MHz Q6600 - water
gotdamojo06 3640 MHz E6600 - air
Tallman 3624 MHz E6700 - air
road-runner 3618 MHz E6600 - air
hardnrg 3602 MHz E6600 - water
kingdingeling 3600 MHz Q6600 - air
Makaveli 3600 MHz E6600 - air
Scratch 3600 MHz E6400 - Peltier Cooler
firky 3600 MHz E6600 - water
DLS2008 3600 MHz Q9450 - air
ccokeman 3572 MHz E6600 - air
road-runner 3560 MHz Q6600 - air
damian 3519 MHz E7200 - air
Andrewr05 3500 MHz Pentium 4 521 - air
road-runner 3402 MHz Q6600 - air
Fueler 3400 MHz E6420 - air
kingdingeling 3304 MHz E6400 - air
cchalogamer 3000 MHz Celeron 420 - air

Prime95 24 hours

kitfit1 5100 MHz E8600 - phase
gotdamojo06 4300 MHz E8600 - water
kitfit1 4240 MHz E6600 - phase
Compxpert 4110 MHz E8400 - air
Verran 4000 MHz E7400 - air
ccokeman 3960 MHz E6750 ES - air
Celcius 3906 MHz Q9650 - air
ccokeman 3656 MHz E6600 - air
swifty11212 3603 MHz E6600 - air
hardnrg 3600 MHz Q6600 - water
ccokeman 3600 MHz E6700 - air
chavalcito 3600 MHz E6600 - air
T_J_Collier 3600 MHz Q9450 - air
Kingfisher 3600 MHz E6600 - air
hardnrg 3560 MHz E6600 - water
Celcius 3402 MHz Q6600 - air
kingdingeling 3400 MHz E6400 - air
ziggy54345 3360 MHz E6300 - air
Verran 3240 MHz Q6600 - air
firky 3200 MHz E6600 - air

Suicide Screenshot

HITandRUN 6000 MHz E8600 - LN2/DICE?
kitfit1 5502 MHz E8600 - phase
HITandRUN 5118 MHz E8400 - dry ice
philbrown23 5002 MHz E8500 - dry ice
Rehit 5000 MHz E8600 - air
kitfit1 4904 MHz E8500 - phase
weldzilla 4903 MHz Pentium D 950 - water
mattwalter85 4750 MHz E8500 - phase
gotdamojo06 4701 MHz E6850 - DICE
road-runner 4700 MHz QX9650 - water
Rehit 4680 MHz Xeon E3110 - air
Verran 4651 MHz E7400 - air
weldzilla 4639 MHz Pentium 4 540J - air
road-runner 4635 MHz Q9650ES - water
HITandRUN 4613 MHz Pentium E2200 - LN2
The_Smith 4500 MHz E7300 - air
road-runner 4427 MHz E6850 - water
damian 4417 MHz E7200 - air
ajmatson 4322 MHz E8500 - air
gotdamojo06 4320 MHz E8400 - water
Tallman 4309 MHz Pentium D 805 - air
Crusader 4274 MHz Pentium 955EE - air
philbrown23 4212 MHz Q6600 - water?
road-runner 4192 MHz E6600 - water
road-runner 4158 MHz Q6600 - air
Rehit 4140 MHz QX6800 ES - air
road-runner 4077 MHz Q9650 ES - water
firky 4050 MHz E6850 - water
Tallman 4042 MHz E6700 - air
hardnrg 4031 MHz Q6600 - water
kingdingeling 4023 MHz Xeon 3060 - air
turophiliac 4004 MHz E8400 - air
AJW256 4003 MHz Q6600 - air
Tallman 4003 MHz E6700 - air
suchuwato 4000 MHz E6750 - air
The_Smith 4000 MHz E6750 - air
firky 3993 MHz E6600 - water
razorcanes 3963 MHz Q6600 - air
ccokeman 3903 MHz E6600 - air
road-runner 3870 MHz E6600 - air
Celcius 3851 MHz X6800 ES - air
gotdamojo06 3800 MHz E6600 - air
J-Stew 3708 MHz Q6600 - air
smolt 3703 MHz Q9550 - air
Celcius 3702 MHz Q6600 - air
weldzilla 3700 MHz E6400 - air
cchalogamer 3605 MHz E6600 - air
swifty11212 3603 MHz E6600 - air
road-runner 3276 MHz E6300 - air
chavalcito 3201 MHz E6600 - air
skunksmash 3183 MHz E2180 - air
get_saif 3120 MHz E2140 - air
Tetedeiench 3015 MHz E4300 - air

post away, lets see some nice clocks here!

I have to get a Conroe....

I guess I'll get it started:
1M:

32M:

maxSS for now:

stepping: haven't checked (it's an ES chip)
cooling: air (zalman)

Does 478 count? my 3.4e often beats the 3.4 775 equivalent.... i should probably say stomps it

BTW: Northwoods were 478 only, everything in the 775 series are pressy based

added, come on there, Ziggy/Bleeble etc, you guys have Conroes, lets see something!

edit: mhh, I guess I'll have scrap the northwoods then, 478 could be a second category, not sure though if we should put it in there, there's not that many people using them anymore.

pfft, what i ment is that mine often beats the 775 equivelant (Most NWs of the 478s STOMPED the 775 equivelant) you might as well change it to 478/775

I know what you meant, but you are probably the only one who will post one then

Here;s my 6600 at 3.2 currently trying to break out of the 975 chipset blues. Using buffalo firestix memory at 4-4-4-12 and its good to 459 at 4-5-5-12.

why don't you post teh times in each category as well? that way anyone looking at the list won't have to look through the entire thread to view the times

I thought about making this thread, but I decided to wait until after I got my Ultra-120 and HR-05 on Wednesday. I just had cable hooked up and it didn't work for more than 15 seconds at a time. Apparently it decided to work now (even if it is going at the ungodly slow speed of .5 Mbps).

How about adding an Orthos category for the dual cores? It's easier than opening to instances of Prime95


Good idea.

I'll be back here in a day or two

ohk, times will be added, and prime95 chenged to Orthos, as you're right, its a lot easier!

Pushed a bit more and have pi 1m and 32m at 3.6.Trying to work on stability.

good stuff ccokeman! A 300MHz improvement isn't bad at all!

Which test are we doing for Orthos? I think Blend is the best choice because it stresses both the CPU and RAM.

yea, blend, the standard test

I use custom priority 8. I set it like the pic below.

[attachmentid=665]

still going though on air

ccoke, I really don't know what difference that makes, just use blend, to make it easier for me and everyone else for the comparison.
ziggy, nice results for an E6300, but be sure to keep the clocks coming, I sense more potential

Running priority 8 is much more stressful than priority 1. That was the reason i suggested it. I have found that i can pass on 1 and not pass on 8 or 9.

i think you should have allendales seperate from conroes. They are very similiar but us poor folks with allendales have only 2mb of cache so it puts us at a disadvantage

allendales = E6300/6400?
E6600 and above = what core name?

e6600 and above are conroes and allendales are the 6300 and 6400

[attachmentid=674]

heres 14 hrs

ohk, will be changed, thanks for letting me know! your result was added as well

[attachmentid=708]
i think thats the best i can do

Not at home right now but i have 380x9 primeing at over 18 hrs.

post a screenshot, ziggy, your results are about to be updated!
edit:
ziggy, something seems wrong with your 16k time on SuperPI! I can get that faster with my 3700+!

Bah, keep that s939 stuff outta here

I 0wn the 939

380x9 prime stable for 24 hours. Now working on 390x9

added, some good stuff there mate!

What HSF are you running ziggy, that is a really good clock nice one

he might be cheating and uses water

Here's 391x9 orthos stable.

375x8 on my rig right now. 3.0Ghz. Ram on 5:6 so it's OCZ ddr2-800 at ddr2-900. So far so good. Gonna keep pushin it before I start a bunch of stability benches. Will keep on goin.

Not that i would acuse someone of cheating but 3.2 just looked pretty good on air lol. But if ziggy is using air i want that HSF lol, that would be an amazing clock.

3.2 with water is no problem.I'm at 3.5 on air.

Nice overclocking ccokeman

nice one ccokeman, but that is using a E6600, i was thinking along the lines of an E6300. I know it will do 2.4 without too much hassle i just wanted to know how to get it any further without risking too much as this will also be my first time ocing lol.

Wow, is 68c reasonable for CPU temperature? I thought that 60 was the upper limit. Then again, I have no true OC experience. If it is, what would a max safe temp be for long term usage? Is this just to see how far you can push the chip and that you guys actually run games at lower speeds?

I will need some screenshots for that! But nice results anyways



I was having a joke mate, 3.2 on a E6300 is very nice on air!


68C load or ilde? if load, kind of high, if idle, WAY TOO HIGH!
To the second question, it really depends, I had my 3700+ @ 2.92 for everyday use, some people only overclock for this competition, it totally depends on the user

68c loaded does seem high but as screwy as abits temp reporting has been in the past i really dont know how accurate it really is. Core temp is supposed to read more accurately but who really knows. That was also in an 82f room. Right now dual folding i run 52 to 55c. These chips also run HOT. Thats after 3 mounting attemps all with the same result. When you see load temps on water in the 50's there is definately some heat being generated. I'm using the TTbig typhoon for cooling and have a Tuniq Tower on the way for Xmas So i will see what i get with it. But its not crapping wu's so i'll run with it.

uhh, tuniq tower, that should increase your clocks by a little bit

I can only hope!

hei ccoke, update your sig it still says 360x9, but I think we got a good 300MHz more outta that bad boy!

I'm letting settle in for a bit till the new cooling arrives and i can figure out how to get stable over 400fsb. It's not a memory problem just an Abit and 975 chipset thing. I can boot and run benches over 400fsb with 1.475vcore but no matter what it wont go orthos stable over or at 400.

I hope your tuniq tower will fix those problems for you!

x6800 ES @ 3.9ghz
q6700 @ 3.2ghz



both don't seem to get too hot either. low 50's on stock coolers.

/hates people who have the chance to hand pick their CPUs

screenshots red?

ok while this isn't an overclock at all, my stock system (the stock cooler is awesome) E6600 PI's at 21 secs at the moment - should be able to bring that down

Mr. Fox, if you want to be added to the list, be sure to post some screenshots, as I have said to evryone else!