Good day!

Still waiting for my bulgin switch.. but its close enough What you see in there is whats in my sig





(yes I know I should bundle the pci express wire with the others behind the 3.5" drive bay.. but it wont co- operate and looks too forced )



well onto the pics!

First, insides lit up!

[attachmentid=17487]

Front bezel.. with the signature lian li glow through the intake

[attachmentid=17488]

Now insides not lit

[attachmentid=17489]

and the beastly xp 120 .. the panaflo has since then been sleeved

[attachmentid=17490]



Well thanks for viewing

Now that is one BEAST of a HSF . Get a UV fan on there or something... the blackness uglifies it all.

looks good man!

if I could find a UV 120mm fan just thats comparable with the panaflo I would

You could paint your panaflo with UV paint. Just don't shoot it into the motor, but I think your competent enough to handle that.

looks pretty good. That one wire is nasty though. Other than that, sweet.

It looks like the James Bond of all computers, all black and stealthy but yet a bit of blue to show that is one extreme gadget! Very beutiful and it shows the amount of hours put into sleeving, a very neat outcome.

looks very nice and good job on the wiring

That looks sweet man!

Awesome looking case and good wiremanagement keep up the good work.

very nice, but eh my cm stacker loves that jungle i have, the psu i got is mainly for servers, so "stealthing" it would practically be impossible, especially with my skills ill probably see what i can do, but hopefully look forward to removing the ihs this month.

A few suggestions for ya Anthony:

1) The grounding wire attached to the cd-rom drive looks really out of place. Either attach it to the other side (right side) or onto one of the mobo standoff screws (what I did). Additionally you could run it along with #3 below.

2) Pull the sleeving on the ATX connector back towards the main connector, the visible wires looks out of place.

3) The 8-pin EPS 12v/6-pin PCI-Express "adapter" cable can be moved into a different place. You could try running the cable alongside the mobo down towards the HD's, then make a turn towards the graphics card. The excess length of wiring can be zip tied and hidden up between the PSU and the optical drive.

Other than those its looking good!

If you have time later on you could add a additional 80mm exhaust fan on the mobo tray, but of course you would have to take your system apart.

Looks Good. How about some pics with it all lit up.

thats some nice work there!

night pics! night pics!

Thanks for the comments everyone, and night pics!!!

[attachmentid=17559]

[attachmentid=17560]

[attachmentid=17561]


And lilkev, fixed all but one i'll get around to fixing that 24 pin connector in a bit

For the pci express adaptor, I could completly tuck it under the vid card but there are many of small components and Id rather not accidently rip one out when Im not paying attention , but I have tucked it in lightly, looks better!

It really looks good man!!! Congrats

Edit: That amber light looks awsome

(Second pic under the video card.It looks like gun fire lol )

Amber light? What amber light ?

Hummmm!! got to do something with that big black fan.
Be careful though this could make it or break it.
What kind of HS do you have on there? i'm guessing xp-90 or SI
Try 2 or 3 blue leds facing the HS from under so the light will come trough the fins.Nothing fancy of paint to remove if it dosn't work

This is something similar i did once with a socket A HS (forget the orange slice though lol)

I love it, i've got the same case and its frikken clean as can be. I know that those cases are pretty hard to hide wires. Oh, what brand of UV cc do you have and how long have you had it? I have 2 6in UV's in my black lian-li and i keep burning inverters.

hey road, im officially envious of you now, i want ya to do my computer like that j/k no need to since i dont use a side window and plan on replacing the psu soon.

Soooooooo sexy.

sexy, sexy, beast!

Yeah, what is that "fire" coming out from underneath the video card?

What fan controller is that? Does the faceplate for it, match the cases brushing? If so, is there a 5.25inch version?

I have seen the 5.25 brushed covers in places like PC Club and some e stores for mods. I kind of wish that I would have gotten a Lian-Li because the sell so many pre-modded gear - less work.

Yeah looks great! But you really need to do something to show off that beastly XP-120 and the nice cards you have in there. You have the CD-roms all lit up, but everything else is in the dark! I've been wanting to do this mod since I saw it about a year ago at Metku Mods, but I haven't been able to find the pens for it, but it would look pretty awesome if you did it on yours.
UV Drawing
Nice work!

Oh yeah, and what the heck is the "grounding cable." Haha, are computers supposed to have them? Because mine doesn't...

rk, if you're handy with rattle-cans, then you could uv-paint the panaflo

you'd need to vinyl-dye it white first, then uv paint, then clear-coat...

Sounds like too much work. Why don't you just save some time and put a Flux Capacitor in there.

Thanks for all the comments and kind words

Starting from the top =D

Kobalt and chavalcito, the 'amber light' is really gunfire err no its my DFI's diagnostic LEDs reflecting off the really really reflective bottom of the case!

yeah Byron this case kinda is painful to do wires in .. I spent around 10 hours =\ With all that room on the left side of the drive bays, youd think Lian Li would be nice enough to move it over a bit so wires like the ATX power and 4 pin could be tucked behind the newly created space in the right side

Those CCFLs are some unknown brand, bout them off Nuclear almost a year ago Origonally it was dual, but one died during shipping. The survivor is holding in strong!

Hey Swiftly, gladdly! Send it over

P8, the fan controller is a 'noice silencer' brand, its available at ADP Mods.com (really, the best shop! ) It is only available in 3.25". The newer versions of it will hurt your eyes.. good thing ADP still has the old ones . Oh and no it doesnt match the Lian Li bezel. The metal on the noise silencer is not as shiny and the grooves are too deep. The quality of the face plate is kinda crappy, similar the the Tt Tsunami's door.

chavalcito again ! I plan on getting those bezel covers, its just hard to convince myself to! expensive =(

CmpFreak88, it shall be brighter! Im getting some more UV CCFls. Really its brighter in person, but I seem to lack the ability to shoot UV nrg knows all about it =P

hardnrg, the XP120 may not stay in there Ive found something that out performs it . If it does, ill probably paint it, would the paint slow down the fan due to weight?

Whew kinda long! Didnt see that you guys replied to this thread woops =P



Yarr ive used too many emoticons!
Bah!


Edit, lighted pic shows the insides better =)

Editx2 woops tursn out this is slightly older before my wire fix

Im not one who really likes the Lian Li cases but you did an amazing job roadkill. Good Job!