My power supply fan is making some wierd noices lately. It sounds like the fan is

clicking. Does this mean my psu is dying or the fan is dying? Do i need to replace

somethin? The temps are fine at the moment.

wot psu is it?

grab an xtra 80mill case fan and open the psu and replace the fan (DO AT UR OWN RISK)

came with my raidmax storm case. 420 wat.


Am i gonna electricute myself by opening it or something?

TO DRAIN THE CAPACITORS:
Do at your own risk

Take a screw driver.. with a plastic handle. wrap a wire.. anti static wire would work. make sure it has contact on the front of the screw driver, then plug it into the grounder int eh wall, the botom prong. then tap each capacitor.. this will discharge it

after doing so, take out the fan, some may require snipping, if you want to try to repair it, grab some wd-40 or some other mechanical oil, and spray it into the back of the fan. To do this you need to take off the sticker and expose its innards. after spraying, spin it to get the oil in , put it back in, may require soldering, if wires were snipped , or if you have an atachment.. attach it back put cover back on and go

if you wish to replace fan, just do the smae thing

cool. dont seem to hard. thanx for all the help

even if you unplug it from the mains, you might die if you touch the top of one of the fat capacitors... i wore those latex gloves that surgeons use while i operated on mine... just on the off-chance that a finger inadvertently touched something... but also i had it open while it was running, so it was live electric... UK electric *IS* more deadly than US electric... you can load so much more stuff on one ring-main over here... so i donned the gloves

edit: wd-40 isn't really a lubricant... machine oil would work, or axle grease, but wd-40 would only temporarily lubricate it... then it would deteriorate and not work as well

edit2: oh yeah, roadkill's discharge thing would work, i just couldn't do it cos mine was running, heh heh

hmmmmmmm

yeh make sure to turn it off. and unplug the cable :S crazy nrg!!1

Man, I hate it when I have to agree with hardnrg but WD-40 will ruin the fan because it contains a pretty powerful solvent - it's great for taking road tar off your car! Using WD-40 will just dissolve whatever lubricant is left in your fan. Use a light weight oil as hardnrg said instead.

Here's a link to clean your fan toroughly

http://www.moddershq.net/forum/viewtopic.php?t=602

Is it blowing less air then it usually does or does it even blow air thats when you should replace the ps. You could open it put some oil on the fan and put it back in.