Before.

After.

I put wire molding on the floppy cables to try to be 'rounded' since I can't make a order for actual rounded.

But after I celeaned up the wiring a little bit I got a 3 degree case drop. I'm happy, processor is running cooler and I did a V11+ 'mod' as you might say and made a 3.5" bezel the knob to turn it since I was tired of the ugly 5.25" they supply and the PCI is just a b*tch to get to when your trying to turn it down on and off quickly without movement (or a whole lot).

Well, for a first time I think it looks decent.

I'm going to paint the chassis some day, and I'm going to go with a green theme since blue is sooo commonly used.

Enjoy.

Looks great good job

Definet improvement from before

Nice job! Looks better then mine

Much Much better, looks fantastic

I love these new case temps ...

Expect to see more

I'm going with a green theme I think, blue's too overused. But we'll see when it comes time for the order and the painting of the chassis and stuff. I think I'ma sandblast it and get it professionaly flat black powdercoated I think, than green CC's inside with blue UV reactive.

nice jon man keep up the good work

Good job man, that is a very high-qual wiring job, and it looks like it was cheap too! Split loom is incredible

looks great, i think it's time to clean up the mess i have there...

i agree on both points time for spring cleaning in my case

notice how the second picture is on an angle....i think hes trying to hide something! haha, jk

very clean wiring job, on small question tho, wuts that molex hanging over your vid card for?

Looks good Ill try to get a pic of mine

Hahaha you think that was bad wiring !!
I have the same case as you i think and check this out!!



Now thats bad wiring

Good job on yours though its actually made me look at mine and say hey i better fix this!
So i will post a new pic soon
Cheers

hehehe.. you should use little lego men climbing up and down the cables

heres the best shot of my pc's guts.. only difference is thats my old geforce 4 mx200 pci card, i have since upgraded to a ti4200, aso... there is now a 3rd cathode, it runs about midway, right above my vid card.. but as you can see, the wires are all tucked far far away

crap thats not a bad idea man
ah well I couldnt get a legoman so heres my sons spiderman instead :

... so when your temps start rising ... do his spidey sences start tingling?

No the temps went up and he said "crap man its real hot in here I think I'll spin a web around some of this appauling wiring and see if I can drop the temp in here!!"

And low and behold........


It was just a quick job but its better and it only cost me £2.49
Plus if you wanna be really picky sholiz34's wiring wasnt half as bad as mine was to start with nor does he have a many wires in there so nerrrr..

Meh ... No, I have the Antec SB1040, you got a Thermal Take it looks like.

I'm looking foreward to:

Painting my chassis
Getting a new side door *messed mine up majorly*

(Or getting a whole new case)


Cold Cathodes
Another HD
New memory
New mobo
Some ThermalTake fans with 4800RPM over these 2800RPM 15CFM Antecs *shakes fist*


Any suggestions? The hole saw did some mess ups around the edges made me angry. I could aways cut within a inch around it to hide some of the mistakes. But we'll see when I get some $$$ ... It's hard being 14.

Yeah the antec is just a thermaltake clone as are a lot of others, I think there are some very subtle differences though.
I am currently making a window (custom one) as i dont have one im gonna leave the zig zag shape in the metal side cover though it'll look sweet

Before and after pics

Yeah no probs just cut one part of it out but the zig zag design i got in mind is proving too difficult at home with my jigsaw so I will take it to work tomorrow and use the Plasma cutter on it I'l start a new thread with it as this one is getting long and i like to start new threads

it's suprising what a difference in cleaning up all the wiring does to the air flow.


my case temp would sit around 89­°F, I split lumed EVERY wire with 1/2" luming.
the mass of wires on the power harrness to the Mobo was seperated into 3 groups and all was done, my temp now sits at 77°F.

clean n pretty too.

nice job dude

hehe

http://overclockersclub.com/gallery/?act=case&id=262

This is my example of cable management, just have to work on my coolmod wires..

http://www.overclockersclub.com/gallery/?act=case&id=191

booyeha grandma

You guys think that was bad
heres a b4

and after
Forgot to hook up scsi cord b4 pic. Its tucked behind the case though. along the side to the top where the scsi drive is.

and from behind

Here is a look at by rig's belly. Lot of wiring but twp PSU's, 7 case fans, an xtra VGA cooling, 2 fan grills, mem cooling and a CCL are adding in wiring. The two PSU's are hooked together using a 12V relay, closed by PSU#1 once started. PSU #2 starts automatically. It is xtra cooled by intake and an outake fans. Wiring management took time, any suggestions ...

i'd buy wire loom.... My comp.

I hadn't scrolled down far enough to see the after pic, so I thought the before pic was the after pic and I was starting to laugh at you. But now I see what you did, good job.

Scyform your case is awesome, I wish the insides of my case looked like that.

i think thats pretty woopass but i think you should get a ducking mod for ur heat sink it helps more than you would think

First thanx. Ghost2520, always appreciated. Second, not that I really care but if Slong69's post was for me, just notice that the duct is already in place.

Peace

slong69

Please don't use the Report button unless you are repoting a post against the rules

man i am so jealous of all ur guys cases. i wish mine looked half that clean. its a mess inside.

Heres how i did mine, wire loom most of the place, other places just tuck and hide. good places to hide the wires are the drive bays and behind the psu, happy modding!

B) Nicely done