Jump to content

goregoyle

Members
  • Posts

    17
  • Joined

  • Last visited

About goregoyle

  • Birthday 12/04/1977

Profile Information

  • Location
    Chicago IL
  • Interests
    Everquest, FPS Games, Buffy/Angel, Smallville, Enterprise and Pro Wrestling

goregoyle's Achievements

Newbie

Newbie (1/14)

  1. omg. i agree tho she should have used a pic of some hot girl. would have made more money. and to bag of air.
  2. would uping the agp voltage help get a higher oc for a videocard? or does this just help with agp bus stability past 66Mhz?
  3. bout 74f in my comp room. should be warmer but alas my trusted p3-500 kicked the bucket last night. tis was a sad moment.
  4. that new pic is totally badass man.
  5. i too would cut in a top exaust fan for a total of 5 to be safe. a high cfm 80 to 92mm should do the job. as for fan monitoring, you can always add a third party fan monitor to take up the slack your mobo cant do.
  6. to get much of an oc past 50mhz(at least in my case) you will have to up the vcore to keep the system running stable. my barton has an oc of 370mhz and i had to up the vcore by 0.125 to 1.775 volts. if you have proper colling you should have no problems with temps
  7. your setup looks great! what case are you getting for the puppy? also i have a v11 and it will work ok, but there is better out there for cheeper. good luck!
  8. i too am thing cpu voltage, also what rpms is your fan running at? my v11 avg 4700rpms. my load temps flux between 41.5c to 43c.
  9. so i had my dimm voltage up to 2.75 and it still wont post at anything other then default settings. /sigh i guess ram timings arnt too big a deal for me. kinda annoyed tho. and ill prob never buy crucial mem again for an oc'd system. i will say one thing for it tho. it is really stable stuff.
  10. so ive read several times on these forums that ocing your cpu using a software program is a bad idea, but what makes it a bad idea? i have a Athlon 1.4Ghz from gateway that i would like to play with. i know i could just swap out the board but im cheap
  11. i dont really care how ugly a product looks, if it works well ill buy it.
  12. go with the 2500+. mine oc'd no problem to 2.2Ghz. (tho remember every chip is different) just make sure you budget for a beefy hsf.
  13. yes i know bigger is slower never done ram before so i wanted to start off slow and work to faster to get a feel for it. and yes they are running at their full 400.
×
×
  • Create New...