i just bought a radeon 7770 and was wondering if someone could help me out with a guide for overclocking and testing?
4 replies to this topic
#1
rieds
-
- Members
-
- 96 posts
Member
- Gender:Male
Posted 30 October 2012 - 11:17 AM
FX6100 @ 4776/ Antec Kuhler920 on Asus Sabertooth 990FX, 8gb Patriot Viper Xtreme DDR3 1866 4gb x2, MSI ATI Radion 5450 512mb, WD 500gb 7200 Sata 6, WD 7200 320gb Sata 6, OCZ Mod Xtreme Pro 500w, Thermaltake V3 Black.
#2
d6bmg
-
- Members
-
- 3682 posts
BMG FTW!!
- Gender:Male
Posted 30 October 2012 - 11:31 AM
Which model to be exact?
Regardless of the model, you can always use MSI afterburner to monitor and overclock the card.
Regardless of the model, you can always use MSI afterburner to monitor and overclock the card.
#3
rieds
-
- Members
-
- 96 posts
Member
- Gender:Male
Posted 30 October 2012 - 10:38 PM
its a HIS radeon hd 7770 ghz edition.
FX6100 @ 4776/ Antec Kuhler920 on Asus Sabertooth 990FX, 8gb Patriot Viper Xtreme DDR3 1866 4gb x2, MSI ATI Radion 5450 512mb, WD 500gb 7200 Sata 6, WD 7200 320gb Sata 6, OCZ Mod Xtreme Pro 500w, Thermaltake V3 Black.
#4
rieds
-
- Members
-
- 96 posts
Member
- Gender:Male
Posted 15 November 2012 - 09:21 AM
the max voltage is set to 1.2v but when stress testing it never gets over 1.175. is it locked by the manufacturer perhaps?
FX6100 @ 4776/ Antec Kuhler920 on Asus Sabertooth 990FX, 8gb Patriot Viper Xtreme DDR3 1866 4gb x2, MSI ATI Radion 5450 512mb, WD 500gb 7200 Sata 6, WD 7200 320gb Sata 6, OCZ Mod Xtreme Pro 500w, Thermaltake V3 Black.
#5
Braegnok
-
- Folding Member
-
- 233 posts
Member
- Gender:Male
- Location:Colorado USA
Posted 16 November 2012 - 07:25 AM
I would not recommend going much over 1.2V. The 28nm Cape Verde core with Hynix memory IC's used on your card are rated to 1250 MHz, set at 0.825V to 1.16V factory settings. Power Saving Technology will drop down to 300 MHz core / 150 MHz memory @ 0.825V while in 2D / idle, and 1.16V load.
If you use MSI afterburner you should max out at 1125 MHz core and 1300 MHz memory, But.. HIS iTurbo overclocking software will go to 1145 MHz core and 1565 MHz memory.
These cards run great CrossFired @ factory settings.
If you use MSI afterburner you should max out at 1125 MHz core and 1300 MHz memory, But.. HIS iTurbo overclocking software will go to 1145 MHz core and 1565 MHz memory.
These cards run great CrossFired @ factory settings.
Edited by Braegnok, 17 November 2012 - 05:30 AM.
i7-3970X-EE
ASUS P9X79 WS Corsair H-100i
ASUS GTX 670-DC2-4GD5 in SLI
Corsair Platinum CMD32GX3M4A1866C9
Samsung 840 Pro Series 512GB SSD : OS
Western Digital RE4 500GB HDDX6 RAID 10 : Storage
Corsair AX 1200i Corsair Special Edition White 600T
Windows 7 Ultimate 64-Bit
