Jump to content

Bulldozer


isq000

Recommended Posts

After an advice of hard ware ect made my decision and ordered the following

M.B Spec -

---------------------------------------------------

Chipset:NVIDIA GeForce 7025 + nForce 630a

CPU Interface:Socket AM3

Front Side Bus:2000MT/s

RAM Technology:DDR3 (Dual Channel)

RAM Slots:2 x 240-Pin

RAM Speeds:DDR3 800‚DDR3 1066‚DDR3 1333 (O.C)

Max. Memory Support:8GB

Expansion Slots:1 x PCI Express x16‚2 x PCI Express x1‚1 x PCI

Storage Controller(s):4 x S-ATA/300‚RAID 0‚RAID 1‚RAID 5‚RAID 10‚JBOD

On-Board LAN:Realtek RTL8211CL (10/100/1000Mbit)

On-Board Audio:Realtek ALC889 codec‚High Definition Audio

On-Board Video:Integrated in the Chipset

Back Panel I/O Ports:1 x PS/2 Keyboard‚1 x PS/2 Mouse‚1 x COM‚1 x VGA‚4 x USB 2.0‚1 x LAN‚3 x Audio

Internal I/O Connectors:1 x 24-pin ATX Power‚1 x 4 pin ATX 12V Power‚1 x Front panel audio header‚3 x USB 2.0 header‚1 x Parallel port header

Form Factor:Micro ATX‚244mm x 205mm

Special Features:Supports @BIOS‚Supports Q-Flash‚Support for Xpress BIOS Rescue‚Supports Download Center‚Supports Xpress Install‚Supports Xpress Recovery 2

Package Contents:User Guide‚2 x S-ATA Data Leads‚Backplate‚Driver CD

 

CPU Spec - AMD Bulldozer FX4100 3.6

-------------------------------------------------

Interface:Socket AM3+ FX 4100 3.6Ghz

Bus Speed:One 2000 MHz 16-bit HyperTransport link

No. of Cores:4

Core Name:Zambezi

Core Frequency:3.60GHz

 

RAM Spec - 4gb Patriot DDR3 1333 Memory

------------------------------------------------

Type:DDR3

Capacity:4GB ( 1x 4gb )

Clock Speed:1333MHz

Compliance:PC3-10600

CAS Latency:9.0

Voltage:1.5V

Chipset:Patriot

No. of Chips:16

Pins:240

Side:Double

Special Features: Non-ECC Unbuffered, 2 Rank Double-sided module, 7.8US Refresh Interval (8192 CYCLES/64MS), 1.5V Power Requirement, Auto and self refresh capability, PCB height: 1181(mil), Serial Presence-Detect (SPD), RoHS Compliant

Package Contents:1 x 4GB Memory Stick ( Will get 2nd later on )

 

CPU Cooler - CoolerMaster Hyper 212 EVO CPU

Case - CIT Vantage ATX Gaming PC Tower

PSU - Corsair CMPSU-600GUK Gaming Series GS600 High Performance 600W Power Supply

HDD 1 - Western Digital Caviar Blue 500GB SATAIII 6Gb/s 16MB Cache 3.5 inch Internal Hard Drive OEM

SSD 1 - Corsair Force Series 3 CSSD-F60GB3A-BK 60GB Solid State Drive

Video Card - Gigabyte GeForce GTX 560 Ti (1024 MB) (GVN560OC1GI) Graphics Card

 

The rest of the hard doesn't seems to make any sense to post like cd/dvd ect rom

So that for now .. as soons as ill get some stuff will start to post some pic's ect

Share this post


Link to post
Share on other sites

Yep. Those parts just don't work together.

 

I'd suggest sending the mobo/CPU back and getting a lower-end Intel Sandy-Bridge build for roughly the same cost.

Share this post


Link to post
Share on other sites

Hmm didn't notice the difference between socket's .. anyway just contacted the company.Might be they made an mistake at description if not ill send them back and get another one .. but basically the system stays the same ;)

Share this post


Link to post
Share on other sites

What board is it? I actually find a bit odd some features. :P

 

I am saying this because the board only supports DDR3 1333 at O.C, only 8 GB of ram and it only has 2 slots for ram. :P

Share this post


Link to post
Share on other sites

Well the MB is Gigabyte M68MT-S2 instead of the one they have shown in picture and description .. but anyway i had to stop this little project of mines :) since the CPU is faulty ... damn thing were tested on an different MB and i got the same result - no Post ... gona have to wait till ill get an replacement.

 

P.S the MB isnt the most expensive one but its not about how expensive things are :P ~ as long as it will work the way it suppose to either way i wont be going for a some massive O.C or more like i wont OC it at all (for now)

Edited by isq000

Share this post


Link to post
Share on other sites

Heck, if you're Waco, even AM3+ boards won't work with Bulldozer. :P

 

Ok then explain why teh company does sell the bundles and even already y build up's with this MB same CPU ect ? Waco or not its no point to be rude if someone is tryn to make a build even if i am not that much experienced with this.Instead of you are an Waco ect you could give me an advice how to ?!

At the same time i gave the stuff ( everything ive got - the hard ware ) to an Specialist who's is experienced enough and even he couldn't do anything with it.

Like i said the CPU were tested on dif. MB and it didn't work

Share this post


Link to post
Share on other sites

Ok then explain why teh company does sell the bundles and even already y build up's with this MB same CPU ect ? Waco or not its no point to be rude if someone is tryn to make a build even if i am not that much experienced with this.Instead of you are an Waco ect you could give me an advice how to ?!

At the same time i gave the stuff ( everything ive got - the hard ware ) to an Specialist who's is experienced enough and even he couldn't do anything with it.

Like i said the CPU were tested on dif. MB and it didn't work

Don't take things personally, it's the internet. And I'm not being rude... except to Waco. ;)

 

Waco is pretty experienced. He had a whole thread dedicated to his FX and AM3+ upgrade that I don't think ever worked. He could probably give the best insight of what's probably going on.

 

I think this was the thread: http://forums.overclockersclub.com/index.php?showtopic=187874&st=0

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
×
×
  • Create New...