red1776 Posted February 26, 2012 Posted February 26, 2012 I had been meaning to share this nifty tool I bought with the group, especially for those of you that are system builders. I got a rather unpleasant reminder last night to do so. Last night my build started acting strange. about every other restart the idle temps would jump about 25c. I figured I had an air bubble break loose and after every trick in the book, I turned to the radiators as the possible cause. I broke out my Snap on BK 5500 Visual Inspection device to have a look. So at the risk of ridicule, and various smart *** remarks the BK5500 is designed for inspecting inside small spaces. It's probably the best investment tool-wise I think i have made. Inside the rad tank, so far so good. Another look at the cooling channels It has a 90 degree adapter, this shot is actually taken from the inside of the radiator looking out ( that's a light fixture on the ceiling) Guess what the blue thing is? that is a inlet/outlet plug they package it with, and it blocks the flow rather well. I went back to the box it shipped in and I had the correct number of them, so it apparently got pushed in at the factory. This thing gets extremely close and holds focus. I have found damaged pins, burned DIMMs, small cracks in PCB's etc. If you build systems, you might want to check it out. Share this post Link to post Share on other sites More sharing options...
Stonerboy779 Posted February 26, 2012 Posted February 26, 2012 It costs a fair insane amount of money but yes it does its job. Didn't you have another thread up about it? One with pics of the pins of a CPU. Share this post Link to post Share on other sites More sharing options...
red1776 Posted February 26, 2012 Posted February 26, 2012 It costs a fair insane amount of money but yes it does its job. Didn't you have another thread up about it? One with pics of the pins of a CPU. Did I? Oh well, pay no mind, I'm just breaking in a friends senility Share this post Link to post Share on other sites More sharing options...
ccokeman Posted February 26, 2012 Posted February 26, 2012 Very nice tool. So the plug was plugging up the works. Odd that it only would do it sometimes. Share this post Link to post Share on other sites More sharing options...
red1776 Posted February 26, 2012 Posted February 26, 2012 Very nice tool. So the plug was plugging up the works. Odd that it only would do it sometimes. I think it was moving around and dislodging when I shut it down. Sometimes it would block the outlet, sometimes it wouldn't I am lucky it didn't block it 100%, I am not sure the shut down sensors are fast enough. since had to tear it down to find it, I took the opportunity to install the second pump. Share this post Link to post Share on other sites More sharing options...
ccokeman Posted February 27, 2012 Posted February 27, 2012 As if one is not enough LOL. Is the second pump for the same loop or a different lop? Share this post Link to post Share on other sites More sharing options...
Stonerboy779 Posted February 27, 2012 Posted February 27, 2012 Redundancy and for enough pressure to make it through cpu 4x gpu and 3 rads If I remember right. Share this post Link to post Share on other sites More sharing options...
BluePanda Posted February 27, 2012 Posted February 27, 2012 Pretty cool little camera -- but by no means is it an affordable tool to just have lying around. Nice find though...pretty difficult issue to figure out otherwise... Share this post Link to post Share on other sites More sharing options...
Boinker Posted February 27, 2012 Posted February 27, 2012 Hey red. What sort of profession do you work in?? But that is not a bad tool there. for 350 its a grand investment for one that does lots of engine diagnostics. Also found this Brochure What ever happened to just using a drug dog... I Troll loled http://www1.snapon.c...ionBrochure.pdf Share this post Link to post Share on other sites More sharing options...
Waco Posted February 27, 2012 Posted February 27, 2012 Hey red. What sort of profession do you work in?? But that is not a bad tool there. for 350 its a grand investment for one that does lots of engine diagnostics. Also found this Brochure What ever happened to just using a drug dog... I Troll loled http://www1.snapon.c...ionBrochure.pdf That's awesome. Why tear it apart when you can use a stupidly expensive camera? Share this post Link to post Share on other sites More sharing options...
red1776 Posted February 27, 2012 Posted February 27, 2012 I hadn't seen that Law enforcement was using them. Well thats the reason i I posted that " for those who do a lot of system builds' was because of its expense. This thing paid for itself a long time ago. @ BP, yeah if you keep it in the case its not a good investment Share this post Link to post Share on other sites More sharing options...
Boinker Posted February 27, 2012 Posted February 27, 2012 That's awesome. Why tear it apart when you can use a stupidly expensive camera? Because clients do not like paying for diagnostic Work and I don't work for free. Share this post Link to post Share on other sites More sharing options...
Recommended Posts
Please sign in to comment
You will be able to leave a comment after signing in
Sign In Now