A quick test at mostly stock settings to get a feel for the board. As the screenshots show I am able to manually lock in the Turbo multipliers in the BIOS. I'm not sure if this is because of the chip or the board/BIOS is allowing it. I have asked for clarification and will post the info when I receive it.
ASUS 4A89TD Pro, 0502 BIOS
Phenom II X6 1035T
4x2GB OCZ Platinum AMD Edition (OCZ3P1600LVAM4GK) PC3-12800 1600MHz 7-7-7-24
200x15.5, Memory @ 1600MHz 7-7-7-24
OCZ 100GB Vertex LE100
SAPPHIRE 4870x2, 4870 Trifire
OCZ Z Series 850W
Configure System Performance Settings
----------------------------------------------------------
Target CPU Frequency _linenums:0'><strong class='bbc'>Configure System Performance Settings</strong><strong class='bbc'>----------------------------------------------------------</strong>Target CPU Frequency:. 3100MHzTarget DRAM Frequency: 1600MHzCPU Level Up......................[Auto]OC Tuner UtilityAI Overclock Tuner ..................[Auto]CPU Ratio............................[15.5]CPB Control..........................[Disabled]DRAM Frequency.......................[1600MHz]CPU/NB Frequency.....................[Auto]HT Link Speed........................[Auto]> DRAM Timing Configuration> DRAM Driving Configuration<strong class='bbc'>************* Please key in numbers directly! *************</strong>CPU & NB Voltage Mode................[Offset] CPU Offset Voltage.................1.284 [Auto] CPU/NB Offset Sign.................[+] CPU/NB Offset Voltage..............1.225 [0.075000]CPU VDDA Voltage.....................2.496 [Auto]DRAM Voltage.........................1.643 [1.65000]HT Voltage...........................1.196 [Auto]NB Voltage...........................1.096 [Auto]NB 1.8V Voltage......................1.800 [Auto]SB Voltage...........................1.100 [Auto]<strong class='bbc'>**********************************************************</strong>CPU Load-Line Calibration............[Auto]CPU/NB Load-Line Calibration.........[Auto]CPU Spread Spectrum..................[Disabled]PCIE Spread Spectrum.................[Disabled]DRAM Timing ConfigurationDRAM CAS# Latency....................7 [7 CLK]DRAM RAS# to CAS# Delay..............7 [7 CLK]DRAM RAS# PRE Time...................7 [7 CLK]DRAM RAS# ACT Time..................24 [24 CLK]DRAM READ to PRE Time................6 [Auto]DRAM Row Cycle Time.................31 [31 CLK]DRAM WRITE Recovery Time............12 [Auto]DRAM RAS# to RAS# Delay..............6 [Auto]DRAM READ To WRITE Delay.............6 [Auto]DRAM WRITE To READ Delay(DD).........2 [Auto]DRAM WRITE To READ Delay(SD).........6 [Auto]DRAM WRITE To WRITE Timing...........4 [Auto]DRAM READ To READ Timing.............4 [Auto]DRAM REF Cycle Time................110 [Auto]DRAM Refresh Rate..................7.8 [Auto]DRAM Command Rate...................1T [1T]DRAM Driving ConfigurationDCTO Information:CKE drive strength..................2X [Auto]CS/ODT drive strength.............1.5X [Auto]ADDR/CMD drive strength.............2X [Auto]MEMCLK drive strength.............1.5X [Auto]Data drive strength..............1.25X [Auto]DQS drive strength...............1.25X [Auto]Processor ODT...................60ohms [Auto]DCTO Information:CKE drive strength..................2X [Auto]CS/ODT drive strength.............1.5X [Auto]ADDR/CMD drive strength.............2X [Auto]MEMCLK drive strength.............1.5X [Auto]Data drive strength..............1.25X [Auto]DQS drive strength...............1.25X [Auto]Processor ODT...................60ohms [Auto]<strong class='bbc'>CPU Configuration</strong>AGESA Version 3.7.0.0----------------------------------------------------------[i]AMD Phenom™ II X6 1037T ProcessorRevision: E0Cache L1: 768KBCache L2: 3072KBCache L3: 6MBSpeed : 3100MHzuCode Patch Level: 0x10000BF----------------------------------------------------------Microcode Updation..................[Enabled]Secure Virtual Machine Mode.........[Enabled]Cool'n'Quite........................[Enabled]C1E Support.........................[Enabled]ASUS Core Unlocker..................[Disabled]CPU Core Activation.................[Auto]<strong class='bbc'>DRAM Controller Configuration</strong>----------------------------------------------------------Channel Interleaving................[Auto]MemClk Tristate C3/ATLVID...........[Disabled]Memory Hole Remapping...............[Enabled]DCT Unganged Mode...................[Always]Power Down Enable...................[Disabled]
