11 replies to this topic

[Bosco]

It seems ccokeman is on a roll with his overclocking as of late

Check out his latest memory review with him reaching 2180mhz

http://www.overclock...pc312800_2x2gb/

[TropicalPreist]

It seems ccokeman is on a roll with his overclocking as of late

Check out his latest memory review with him reaching 2180mhz

http://www.overclock...pc312800_2x2gb/

aww man i wish i new before i went ahead and bought these mushkins.

http://www.amazon.co...x_ya_oh_product

[GabrielTessin]

Good review and astounding over clocking on these sticks.

[Krayt1x]

Does anyone know if performance like this transferes through to the KHX12800d3k3?

[Waco]

The only question I ever have when reading memory reviews is about the testing when overclocking. Is "stable" enough to get through the benchmark suites or is it memtest stable?

[Bosco]

The only question I ever have when reading memory reviews is about the testing when overclocking. Is "stable" enough to get through the benchmark suites or is it memtest stable?

Frank does both

[ccokeman]

If it aint prime stable it aint stable! Memtest stable and super pi stable does me no good and is not a real indicator of what a product will do for you everyday. I could memtest this set over 1100MHz but but it is not stable enough for everyday use at that level. Thats why in the i5 review I showed a bench stable 4.4+GHz for the i7 870 but ran the benches at 4.2 because that is where it was 24/7 stable.

Thanks for the question.

[Waco]

If it aint prime stable it aint stable! Memtest stable and super pi stable does me no good and is not a real indicator of what a product will do for you everyday. I could memtest this set over 1100MHz but but it is not stable enough for everyday use at that level. Thats why in the i5 review I showed a bench stable 4.4+GHz for the i7 870 but ran the benches at 4.2 because that is where it was 24/7 stable.

Thanks for the question.

Awesome! Thanks for explaining.

[ccokeman]

No problem!

[jacek909]

In your article, you provided timings in the specifications table as 8-8-8-20. According to Kingston's webpage, KHX1600C8D3K2/4GX modules were tested to run 8-8-8-24 at 1600 MHz (see http://www.valueram....C8D3K2_4GX.pdf). Could you explain the difference? Are these the same modules you tested?

[ajmatson]

Again a very good review and awesome overclock speeds.

[Greenmaker]

Have em......love em... On my setup they are easy to boost. They come in at 1333MHz until you change their ratio to 1:4 and voltage up to 1.6vdc