Jump to content

juliox

Members
  • Posts

    21
  • Joined

  • Last visited

juliox's Achievements

Newbie

Newbie (1/14)

  1. ok guys i have a intel dh55tc motherboard whit a core i5 750, but i whant to change the processor only so i chequed intel page and it show that the strongest processor for these board is the core i7 875K. so mi question are these: does mi board really supports these proccesor ? and aparently the 875k does not include a heat sink is i was thinking on gething the corsair A50 do you guys thinck it will do the job for me?
  2. yes i cosidered that, but i will do it when i get a new cooler because right now i am runing mi core i5 750 whit the stock cooler, i think i will get one next month, for now i am nuning nice crisys 2 max out whit DX11 and high res textures and 1920X1080 run like 33 to 40 frames per second
  3. ok the Crisys 2 worked fine whith all max, DX11 and High res, the 2 setings worked fine dint crash i tried nvidia stock and the seting wevsspot recomended, diference was litle only 2 frames. what i am thincking about these is maybe wen they were preparing mi especific card they didnt adjust well the voltage, but anything alse the card works perfect, soo yea i will use gigabyte factory stock(oveclock 900MHZ) always but wen i find a game the gives me problems i will adjust it simple as that. Thanck for your replys guys, it is a good thing to know i can always trust the comunity hear for advice.
  4. thancks wevsspot right now i am downloading crisys 2 high tex pack already tried it whit only dx11 all max 1920X1080 wen its finish i will trie again whit your sugested seting and let you all know.
  5. well on nvidia stock 822MHZ is stable but in gigabyte factory overclock at 900MHZ it only has give me problems in 3 games out of 60 that are FEAR 3 DX11(DX9 run fine and DX11 underclocked to), crisys 2 DX11(same as FEAR 3) and finally just cause 2 that i thinck only uses DX10. any other game that used DX11 like, metro 2033, dirt 2 and 3, BF bad company 2, lost planet 2 and all of mi other like 50 games. worked fine those games never crashed even on overclock.
  6. ok new thing i tested crisys 2 whit DX11, that game crashed on mi like afther 5 minutes of gameplay but underclocked again worked fine, so yea i whatch mi voltage whit aftherburner and it was 0.985 yea i thinck is a litle low, but like is said i will leave like that and just underclock the card mi performace loss is only of 3 frames per secound(not much of a deal) But if in any case i whant to encrease voltage what voltage do you recomend me for 900MHZ.
  7. ok guys i did the unigine all max at 1920*1080, i did it on factory clock 900MHZ and nvidia stock 822MHZ, in the 2 test worked fine it didn´t crash here are mi results 900MHZ FPS-23.7 score-598 min FPS-3.3(i thinck these es because loading times) max FPS-51.3 GPU Max temp- 75C 822MHZ FPS-22.6 score-570 min FPS-11.6(yep loading times) Max FPS-48.1 GPU Max temp- 71C so yea i thinck mi card is fine the games are the ones that dont run well in a oveclock card whit stock voltage(as i said i am not touching these i prefer underclock some say is even good for the card i dont know really, what are 3 freames anyway), i will keep afterburner just for the games that give me problems, i will go and trie crisys 2 underclocked and see what hapens leave you opinion of mi tests please
  8. well let me tell you i have like 60 games all released from 3 years ago to these date, and of all those games only the 4 i listed have gived me problems, so to tell the truth i am really pleased whit the card, and in crisys 2 forums states that the game on DX11(i finished in DX9 and dint give problems) does not run well in a overclock card even if it is factory evoerclock so i am guesing that the same goes to FEAR 3(that afther underclock works fine) and Just Cause 2 because DRagon age 2 i crashed but it not makes me to reset pc mi it only returns to windows and tells me the program was closes because an error so i am thinking that game is more like a software issue
  9. well guys i underclock it to 822MHZ nvidia stock speed and i trie it whit FEAR 3 DX11 as i said in the first post when playing that game it crashed like 15 minutes of gameplay, but underclocked i was able to play for 2:30 hours nonstop hell i was able to beat the game, more soo i barely se performance go down so it seams some games not work well oveclocked i will trie unigine and tell you how it goes if there any other good software that is free to underclock manually the card let me know please or were do i register msi afteburner(or its free? and is only the beta that expires) that way i will only use it for the game that give me problems
  10. yea 275.33 right now, those 4 games that give me trouble run fine they crash after a time of playing them that for most of the cases if 30 minutes and is completely random sometimes is so much stuff going on in the game sometimes nothing.
  11. ok guys the thing is that is have a factory overclocked gtx 560 ti from gigabyte, is at 900 MHZ i boy it like in february up untilnow it has never gived me eny troble except for 4 games that are Crysis 2 DX11, fear DX11 Dragon age 2 DX11 and just cause 2DX10, the games pause starts buzzing sound fron the speakers then goes to black screem whit the game BMG still plays then i have to reset mi PC. some tell me if becuase DX11 but i played other games like lost planet 2, dirt 2 and 3, metro 2033 and the whitcher 2( only whit Hyper sampling of) at max(at 1920 X 1080)whit AA at 2 or 4x(for me that enough) and never have any problem whit those. some other tell me that is because mi card is overclocked making it unstable and they give me 2 solutions: 1: increasing the voltaje of the card and 2: underclock the card to nvidia stock speed so mi question is first what do you thing about the problems that is have and second i am not going to increase the voltaje of the card(i know thats is very risky) i more like underclocking the thing whit MSI afterburner, but is there any risk in undercloking a video card. i dont thinck is heat i had GPUZ runing making a log file and it never passed from 80C. mi sistem is core i5 750 stock 8 gigs of RAM DDR3 1333MHZ a GV-N560OC-1GI gigabyte 560ti factory overclock. Thermaltake 600W PSU
  12. hey guys i hope your having a good time, these topic is beacuse a need your help. i have a core i5 750 cpu runing whit the stock cooler for like 1 year and 3 months already, has work perfect and never gave me probles, but one days a was traing out somo temperature monitoring software and for mi surprise the cpu was runing in 79 to 83c degree ( in full load) and 40 to 43 idle again the pc never has crash beacuse heat probles but mi friends told me that temp was to high, so i tryed reset the cooler and change thermal compound and many things to get it to lower temp but nothing always runs high. so i am freking tired of these so i whant to buy an aftehrmark cooler wing based( i dont whant to put more load in mi PSU) that has the fan no top no on the side, so can you guys recommend me a good one that costs $50 max, more so beacuse i am thinking i may buy a core i7 875K and as you know the freaking thing does no include a cooler. thanck you.
  13. thanks guys for replying to mi question, now i am relieved and just waiting for mi new card to play some DX11 games. thanks for sharing you wisdom and advices whit me guys
  14. yes thats mi PSU,how do you spread the load well across both rails can you tell me please thanks for the replys
  15. ok guys i have purchased a gigabyte GV-N560OC-1GI card the OC at 900MHZ one, that will arive at the end of march, so i whant to know if mi PSU will be able to handle it here is mi sistem right now intel DH55TC motherboard intel core i5 750 2.66ghz stock processor(not OC) 8GB of ram 4X2 kingstone 1333MHZ samsung 500GB 720RPM HD samsung DVD ROM is it right now a EVGA 9800 gtx+ videocard and ¡¡thermaltake w0129ru 600w 2.2!!!! PSU i have seen on the internet the manual of these card and it states that the minimun requierement is 500Watt and i have 600Watt so i gues i will have no problem there but some freind of mine tell me that mi PSU it would not be able to handle these card so the question is if i can pop these card on mi PC or will i have problems whit mi PSU
×
×
  • Create New...