Jump to content

Ricky_005

Members
  • Posts

    12
  • Joined

  • Last visited

Ricky_005's Achievements

Newbie

Newbie (1/14)

  1. Can the PCI 16x slot be used for a 1x Card? Im wanting to add a PCI e 1X TV card to my board but I dont want to use my 1x slot next to my video card which would run my temp up on my video card. Seem like I heard that you could use 1x in the 16x slot. Can someone confirm?
  2. Ok after resetting my cosmo and setting my CPC to auto its seem to be working at T1 I downloaded Everest this is what it would give me in the trail version.....And wouldnt you know it, It killed Sandra :drool: I dont think I will go though the Install again......To revive it CPU CPU Clock Motherboard Chipset Memory CL-RCD-RP-RAS Read Speed Opteron 150 2400 MHz [ TRIAL VERSION ] nForce4 Dual DDR402 2-3-2-5 CR1 6197 MB/s
  3. Thanks for the info.....Guys ......I do have A64 Tweaker and have disabled T2 and sandra would still report T2........It looks like I'm going to have to benchmark the mem to see whats going on.
  4. I did try bumping it up to 2.7 volts.....and sandra is still reporting 2,3,2,5 2CM I am going to reset my cosmo and set my CPC to auto and keep my volts at 2.7 and see what happens.
  5. No Floppy I did a clean boot and killed the background programs before doing the winflash. The only good thing is that my mem is error free when running.
  6. latest Bios Version..........11-14-05 And I want to say I only flashed the Main Block. I did not have the option checked to flash the boot block or the DMI Block. Maybe I should redo my flash?
  7. Yes they are in the orange slots I was thinking about boosting the volts to 2.7 to see if it would make t1 kick in. But I just dont think it will work. Defalt Voltage is 2.6 In order to request T1 Timing, isnt the switch in the bios? ( CPC = Enabled )
  8. Ok guys I have a DFI Ultra-D with OCZ Platinum Memory ( OCZ4002048ELDCPE-K ) I have the latest Bios for the board and I can't seem to get the mem to run at command rate 1 The mem are in the orange slots. I have CPC enables but yet it wont run at T1 my voltage is 2.6 and timings are set to 2,3,2,5 Any Ideas? :sad: O yea sandra says my mem was manufacture in 1999.......whats up with that :eek: and ofcourse STD is set at 2.5,3,2,5 Do you think OCZ is playing a game? SpecificationsModel Brand OCZ Model OCZ4002048ELDCPE-K Type 184-Pin DDR SDRAM Tech Spec Capacity 2GB (2 x 1GB) Speed DDR 400 (PC 3200) Cas Latency 2 Timing 2-3-2-5 ( We Wish you Good Luck at T1 ) Voltage 2.6V ECC No Registered/Unbuffered Unbuffered Heat Spreader Yes Warranty Manufacturer Warranty Lifetime
  9. O Yea..........Dual Cores...........sounds tastie............But how about show me some FPS Games that are multi threaded? Yea we know Quake is........but thats it. I will be giving the PC I will be building next week to my wife in about 2 years......Than I will be jumping on that Crazy Dual Core Train w/DDR-3.........Muhahahahah
  10. There are a few components that I will be keeping from my older AMD XP1800 System, Like the Plextor DVD burner, SoundBlaster Audigy card & the 3Com PCI ADSL Modem. Nothing wrong with any of it.......just can't justify buying a new burner and sound card that I wont be able to tell much of a difference in quality or speed. It is tempting to go with the sata Plextor but I will wait for the HD burner. As for the memory setting I will have to find that database you spoke of icon57 Yea OC ummmmm Its like driving a Vette, If you run it hard enough sooner or later its going to BREAK.......lol
  11. To start off, this will be my first experience with a DFI board. Looking for advises on memory settings in the bios which works well with the OCZ memory below. Any other pointers you could give me would be welcomed. My main intent is to keep everything running at stock speeds and have a rock solid system. I have no plans on overclocking any components. I am hoping this build will last 4 to 5 years like my last build ....... :nod: New System will be Assembling 2-11-06 DFI LanpartyUT nF4 Ultra-D AMD Opteron 150 Venus Socket 939 OCZ 2GB (2 x 1GB) DDR 400 Platinum ( OCZ4002048ELDCPE-K ) eVGA Geforce 7800GT 256MB PCI Express x16 ( 256-P2-N517-AX ) Western Digital Raptor 150GB 10,000 RPM ( WD1500ADFD ) Plextor IDE DVD Burner ( PX-712A ) SoundBlaster Audigy ( OEM ) 3Com PCI ADSL Modem ( 3CP3617B ) Enermax Liberty ATX12V 500W ( ELT500AWT ) P.S. If anyone would like to have a NEW in the box 3Com PCI ADSL Modem ( 3CP3617B ) I have 6 for sale. Will sale for cheap.
×
×
  • Create New...