Alittle help

[Madmullen]

I have made a small overclock and it is stable, on running CoolTemp,CPZ,Prime95  and getting system info I did notice that the actual default setting showed that it could run at 4100mhz, I have attached file showing readings.

I did try running at 3800mhz but I kept loosing core5 so I`m not to sure what I should do next as I think having 6cores and not using the cpu`s full potential is a waste, any ideas.

 

He is my spec:

Case:Corsair Osbidian 750D
Motherboard:Asrock 990FX Extreme4
CPU: Amd FX6300 six core Black Edition 3.50MHZ  (3.76Mhz clocked)
Ram:Corsair Vengence 16GB Dual Channel @ 1600MHZ  (1720mhz clocked)
Graphics: Nvida GeForce GTS 450 1GB DDR5 (need to get new card)
Sound: Onbrd
HDD: Baracuda 1TB
HDD: Toshiba 250GB
DVD: LG Lightscribe
PSU: Corsiar RM Series 650W
Aerocool X-Vision 5 Channel LCD Fan Controller

Cooling: Corsair Hydro H105 running in Push (Corsair 2XSP120mm) exhausting top of case
Corsair 2 X AF140mm Intake and 1 X  SP120mm Rear exshaust.

Edited April 13, 2014 by Madmullen

[WarWeeny]

The best thing you can do is to search for some overclocking guides on overclocking a vishera chip.

 

It is likely you need to increase voltages to keep a stable overclock, but there can be so much more.

What are your bios settings for this overclock? Did you do anything to the ram? Did you overclock by multiplier or by base clock? What voltages did you use for this overclock? Did you leave anything to auto?

 

You get the idea.

[DanTheGamer11]

Stay below 62C, that voltage seems a bit low compared to what ive seen on de webs for a 6300 at 4ghz, 1.32V+?

Edited April 13, 2014 by DanTheGamer11