Jump to content

Rockrtx

Members
  • Posts

    94
  • Joined

  • Last visited

Profile Information

  • Location
    Gatineau,Canada

Rockrtx's Achievements

Newbie

Newbie (1/14)

  1. intel i7 920 3.7 ghz asus p6t deluxe v2 corsair 6 gb 1600 mhz noctua NH up-12 heatsink corsair hx 620 samsung spinpoint f3 1 TB seagate 250 GB 7200 rpm pioneer DVR-216D EVGA geforce 9600gt Cooler master 690 logitech mx-518 logitech plain keyboard Samsung syncmaster 1680X1050 Altec lansing speakers Country Canada
  2. I have to admit it is a bit pricy at 150$.......the 129$ special is not that bad IMO but it is not USD price. A CM 690 is 79$ US Thing that a CM Sniper as more than 690 to justify higher price: - Dust filter - fan speed control - handle on top - wheels at the bottom I have read that if you tap the top of the case some will reset the system ( bad reset button? ) But why this case will BSOD or reboot with a discharge and not others case?
  3. I have a CM 690 and like it but if i have to build a new rig a would definitely choose a CM Sniper case. http://www.newegg.ca/Product/Product.aspx?Item=N82E16811119194 - This case look nice ( interior all black ) - got great air flow ( 3x 200mm + 120mm ) and silent if you want ( fan speed control ) - Dust filter - Big enough to fit any card in - handle on top and wheel in the bottom ( or the rubber feet ) - 11 drive bays ( tool less ) - on top of the case : 4 usb,1 e-sata, 1 firewire, headphone jack,mic jack 129$
  4. I have try to 1.4 volt on the vcore with low multi and 200 bclk with no luck but yes it is a CO and require a lot more voltage than DO for same OC I think like CCokeman said, the chip myth have hit a BCLK wall and mine is pass 195 = no go
  5. Thank for info, but if i want to be sure i got to drop 300$ for another chip..... I am testing right now ( 195 x 19 = 3705 ) and it pass 3 round of prime 95 with mobo temp at 65 degre and cpu 74 degre max on 1.32500 v core , qpi 1.35 and almos everything else on auto.energie saving feature off. Did you ever try crossflashing bios to help BCLK? like the 0006 special bios or p6x58d premium bios?
  6. Now i know it is not the chipset heat problem, i disable HT and mobo maintain 48 degre and then crash. On my normal OC stable ( 3.4 + TURBO ) the mobo hit 58 degre and it is fine. I am about to give up on the 200 bclk try about every thing and no better Thing that i try - Underclock memory - low OC ( 200 X 15 ) - vcore 1.25 - qpi on auto, 1.35, 1.3750 , 1.4 - load line calibration on - cpu pll auto , 1.88 to 1.96 - al power saving feature off ( speedstep,turbo mode , ce1 support ect...) - cpu differential amplitude auto, 800 mv, 1000 mv - cpu and PCIE spread specrum disable - IOH auto, 1.3 to 1.4 - PCIE 100 to 110 What else could i try to help bclk? Booster cable on mobo?????????
  7. I can OC the chip to 4 ghz with lower bclk ( 195 ) and higher multiplyer. Psu is fine.....bclk is the problem. I watch my mobo heat and when i start prime 95 the mobo will go quick to 49 degre and freeze. Is ther a thing i can do to make my chipset cooler other than put a fan beacause i have no space bettween cpu cooler and chipset tu put a permanant fan there?
  8. Ok i will try again i just change to bios 1108 yesterday and try PCIE clock to 110 but can't run prime 95 more then 30 second ( 200 x 15 = 3000 mhz )....but dint not try IOH and PLL
  9. I can boot my PC at 200 bclk at low multiplier but nothing stable. Try almost everything from voltage: , cpu, qpi , pci-e, ioh, ich ......but can't get a easy 3600 OC with my ram running at 1600 ( 200 bclk ) speed. My question is, got a i7 920 CO if i change it for a DO will it Bclk higher? Or its the mobo ( P6T Deluxe V2 ) olding my Bclk? Cpu or Motherboard? Rock
  10. Download prime95 and run torture test on 1 thread and then check with CPU-Z,right click on core and switch between core 0 to core 3 and you will find witch one is on turbo boost.
  11. Thanks for your reply,i Think will continue to backup but the raid 1 is really tempting since i could double read performance.
  12. Yes i know i can raid 2 drive to do it but will have to pull 80-100$ of my wallet for another Samsung spinpoint f3. But still want to know if double address a folder is possible without a raid 1 config....?
  13. I got windows 7 64 bit on a 1 TB Hdd and got a second hdd of 250 GB with XP SP3 tha i keep to backup my data. I copy and paste folder so i can access on other drive ( XP SP3 ) if main crash ( windows 7 ...) I know many people edit the main folder with all important data to second HDD but if second Hdd crash or died it is kind of useless. I did some research and found none. So my question is can i address a folder on 2 Hdd? EX: keep original location and add second HDD so it write at both place and my dont worry about backup anymore C:,F:MY folder ???
×
×
  • Create New...