Jump to content

Sneakytrooper

Members
  • Posts

    75
  • Joined

  • Last visited

Contact Methods

  • AIM
    DryKillLogic1984
  • MSN
    None/Don't use
  • Yahoo
    None/Don't use

Profile Information

  • Gender
    Male
  • Location
    Nippon
  • Interests
    Electronic's Tinkering,Gaming,Overclocking,Modding

Gaming

  • Steam
    Sneakowns84

OCC

  • Computer Specs
    Case: Corsair Graphite 760T
    Mobo: AsRock X470 Fatal1ty Gaming K4
    Mem: HyperX RGB Predator DDR4 16GB 3200Mhz
    CPU: AMD Ryzen R5 3600X
    SSD: Sandisk 240GB Extreme Pro SSD
    Samsung 970 Evo NVMe M.2 500GB
    PSU: Corsair RM750i
    VGA: EVGA GTX 970 FTW+

Sneakytrooper's Achievements

Newbie

Newbie (1/14)

  1. Holy Crap , its been ages since i've been on here. hahah. I guess ill go post some case pics.

  2. i didn't run a memtest86 test myself. i just dled the prog and ill try it later on when im home. As far as the sticks go, as ive said. i ran all sticks one by one and in pair in each individual slot. i dont think the slots are bad at this point because as i said i purchased another board to test with and it does the exact same thing. The issue appears as i get to the login screen in win8 , if i use the one stick i know is good it shows no signs of failure. However the other stick is faultly no matter which slot i use,or which paired configuration i choose. I'll again. try this and see what all happens.
  3. The PSU is brand new from amazon.Ive been through 2 parts of each thing except mem. Im set into believe its my mem , even though they sent it back saying its fine. As ive tested each stick on each slot and only one of them causes the freezing. No matter which slot i put it in. Now that ive got my thoughts about im debating on weither or not i should send back the new mobo and CPU i got, because if it's just the memory then the purchase is invalid. but at this rate i didnt have a choice, having no where to go and test things at a friends place or whatever. Im currently overseas in japan. So not so many resources. I just have to get this issue worked out or my wife is going to strangle me xD. Do you believe even though i purchased a new crossblade ranger i should stick with it, over my F2A85V Pro? or just return it and exchange for some new mem sticks? Thanx Again.
  4. Opps sorry forgot to add all this Case: Corsair Graphite 760T Mobo: Asus Crossblade Ranger CPU: AMD 7860K Mem: Corsair Vengance Pro 16GB(8gbx2) 1866MHz VGA: EVGA Geforce 970 FTW HDD: Sandisk Extreme Pro 240gb SSD PSU: Corsair RM750i
  5. Hello everyone, I've got a problem maybe someone could assist me with. Ive just Installed a new mobo and cpu into my case and the old was giving me the same issue. Im thinking its the memory but i need a second person to tell me what im not doing correct or what isn't correct. Im not sure wiether its with the mobo or mem. Ive got 2x 8gb sticks of corsair vengenace pro 1866mhz ram. , totaling to 16gb of total system mem. The problem is the the system keeps freezing up after post or on my way into windows,for the install of the OS. Everything in or on the system is completely new, as its a new build.Im using windows 8. Ive sent the memory off to a company to check and see if they were bad. The returned with no issues given. Is there a setting in the bios ive overlooked?The board has a led to indicate ram issues and it comes on during post but goes off,Should this even be showing even if there isnt a issue? Btw , nothing on the system is OC'ed. Everything is Factory settings. The motherboard is a Asus Crossblade ranger. Never Flashed Bios as its fresh out the box. Thanx in advance.
  6. i haven't been on here in a while. so its time to get back to work and finish a build a recently started. Interested?

  7. ok kool see thats all i needed to hear ,and thank u roadkill for backin me up on that,ii swear its like i try to explain a few things an question a few things an they think i'm bashin....wtf iono but yes thank u for the info on that.
  8. ok first off i'm not bashing them i'm just being honest about what i say,secondly i accept anyone's opinion i don't just ask for it an then start bashing them if they say something i don't wanna hear,and thirdly who are u to tell me this? are the owner of the board no!
  9. ok whys it crap ,is it becuz u don't like them or dont use them? i happen to like ultra products. they are well built in my opinion. but hmm ok what kinda would u advise me to look for?
  10. eh well i've found one at zip zoom fly for 99.00 with free 2nd day air,so that a good deal if u ask me,but its just a opinion
  11. ok kool well that pretty much answers what i've been wondering ,reason i'm askin is because i never really got around to reading things about it ,been a lil lazy lately....too much work.but yea as i was saying ive been wondering becuz i have this lil prob with my rig having to many fan near the cpu and rear exhaust. i have a fan on the bottom of my psu and i've been worried that having 3 fans close to each other would cause mal-airflow,kinda sux cuz i might have to get another cpu heatshink{i gotta volcano 12} its slighty bigger than i thought. so i got to lookin at power supplies and things i should consider for the prob to be resloved.i found this ultra x-finity 600 watt psu thats got more juice and a better lay out of fans on it .ok well i'm gonna stop rambling now before i cornfuse one of ya'z
  12. whats the difference in a modular psu and a standard psu?
  13. i'm also using PDP patriot W/ XBL tech. i'd go with it if thats the timings u're looking for plus if price/performance is something u're thinkin about. here's a link to a review i read PDP Memory review enjoy!
  14. well right not i have all my fans with rubber gasket to keep them from vibrating everything in and on my case lose. but i still know my tornado is going to get even with it and a controller.i was just wondering about this stuff to see if it would be able to help deaden the noise a little bit beings its being put in my room.as far as overheating how bad where case temps?
×
×
  • Create New...