Jump to content

delacruzpaolo21

Members
  • Posts

    10
  • Joined

  • Last visited

delacruzpaolo21's Achievements

Newbie

Newbie (1/14)

  1. Another update, I managed to lower my vcore after setting my bus speed to a fix 100.00mhz set my cpu pll voltage to 1.6, 1.5 unstable with ibt turbo oc 4.4ghz internal pll overvoltage : disabled EIST : enabled intel turbo boost : enabled enhanced turbo : disabled XMP : enabled (1866mhz 1.5v) DRAM timing mode : auto Vdroop offset control : [+37.5%] digital compensation level : high CPU PLL voltage : 1.6000 C1E support : enabled overspeed protection : disabled intel C-state : enabled long duration power limit (w) : 200 long duration maintained (s) : 3 short duration power limit (w) : 250 runs stable at prime95 blend test & ibt cpuz reads vcore @ 1.296v full load and 80 degrees max temp aida64 extreme reads my cpu vid @ 1.391v
  2. I have another question wevvspot, my bus speed seems to be a bit higher than the rated bus speed, runs 100.5xx. I haven't fiddled my bios yet to make it a fix 100 mhz bus speed, my question is if I lower my bus speed to a fix 100mhz will it possibly allow me to lower my vcore?
  3. I haven't run a memtest yet just prime95 blend test for 6 hours, I'll try a large fft for my memory right?
  4. just an update managed to drop my CPU PLL voltage to 1.5 temp results are great turbo oc of 4.4ghz internal pll overvoltage : disabled EIST : enabled intel turbo boost : enabled enhanced turbo : disabled XMP : enabled (1866mhz 1.5v) DRAM timing mode : link Vdroop offset control : [+50.0%] digital compensation level : high CPU PLL voltage : 1.5v C1E support : enabled overspeed protection : disabled intel C-state : enabled long duration power limit (w) : 200 long duration maintained (s) : 1 short duration power limit (w) : 250 runs stable at prime95 blend test cpuz reads vcore @ 1.312v full load and 80 degrees max temp but aida64 extreme reads my cpu vid @ 1.391v thanks again wevsspot
  5. I'm using Thermaltake Bigwater 760pro liquid cooling kit, not much of a cooler.
  6. yeah I know my temps are a bit high, so I was hoping to lower my Vcore to help me lower my temps, any advise Black64?
  7. Hi guys I have a small question does lowering the CPU PLL helps lower the vcore? I'm using a turbo oc of 4.4ghz internal pll overvoltage : disabled EIST : anabled intel turbo boost : enabled enhanced turbo : disabled XMP : enabled (1866mhz 1.5v) DRAM timing mode : link Vdroop offset control : [+50.0%] digital compensation level : high CPU PLL voltage : auto C1E support : enabled overspeed protection : disabled intel C-state : enabled long duration power limit (w) : 200 long duration maintained (s) : 1 short duration power limit (w) : 250 runs stable at prime95 blend test cpuz reads vcore @ 1.312v full load and 80 degrees max temp but aida64 extreme reads my cpu vid @ 1.391v my specs: intel core i7 2600k z77 mpower crucial ballistix elite 16GB (8GBx2) asus gtx 690 seagate barracuda 2tb thermaltake TR2 900w
  8. Hi guys I have a small question does lowering the CPU PLL helps lower the vcore? I'm using a turbo oc of 4.4ghz internal pll overvoltage : disabled EIST : anabled intel turbo boost : enabled enhanced turbo : disabled XMP : enabled (1866mhz 1.5v) DRAM timing mode : link Vdroop offset control : [+50.0%] digital compensation level : high CPU PLL voltage : auto C1E support : enabled overspeed protection : disabled intel C-state : enabled long duration power limit (w) : 200 long duration maintained (s) : 1 short duration power limit (w) : 250 runs stable at prime95 blend test cpuz reads vcore @ 1.312v full load and 80 degrees max temp but aida64 extreme reads my cpu vid @ 1.391v my specs: intel core i7 2600k z77 mpower crucial ballistix elite 16GB (8GBx2) asus gtx 690 seagate barracuda 2tb thermaltake TR2 900w
×
×
  • Create New...