kelm

anybody else? Thank you!

Iknow that, but sometimes when i turn on my pc, it just start with boot loop. Like an fail OC. Could you tell me your BIOS config? I already get almos everything about this mobo and till now i cant go over 450FSB! Thanks

Nobody????

Hi guys. I'm haveing serious problems to oc my EP45 UD3P. I've tried every that i tought and was possible for me and nothing tought 450FSB! Once i got 500FSB but unstable, just for few mins! The maximum stable that i got was 450FSB/1.41v/5:8 1080Mhz 5-5-5-15. Once i got 3.8Ghz(475*8 ) 1.43v with an ASUS P5Q Deluxe. So, my problem wasn't CPU!!! To get 4.0Ghz(500*8 ) i need 1.55vCORE and everything @ AUTO, but just for few mins and crash!!!! Can anyone help me? Thanks 4Ghz(500*8 ) 3.6Ghz(450*8 MEMO 5:6 1080Mhz 5-5-5-15). IDLE FULL Intel Core 2 Quad Q8400S (ES) Gigabyte EP345 UD3P (BIOS F9) G.Skill 2x2Gb DDR2 1066Mhz 5-5-5-15 MB Intelligent Tweaker (M.I.T.) Robust Graphics Booster------------------------------------[Auto] CPU Clock Ratio--------------------------------------------[8x] Fine CPU clock ratio---------------------------------------[+0.0] CPU Frequency----------------------------------------------3.6GHz (450x8) ******************** Clock Chip Control******************** CPU Host Clock Control-------------------------------------[Disabled] CPU Host Frequency(MHz)------------------------------------[500] PCI Express Frequency(MHz)---------------------------------[101] C.I.A.2----------------------------------------------------[Disabled] ******************** Advanced Clock Control ****************** CPU Clock Drive--------------------------------------------[800mV] PCI Express Clock Drive------------------------------------[900mV] CPU Clock Skew---------------------------------------------[150ps] MCH Clock Skew---------------------------------------------[100ps] ******************** DRAM Perforamnce Control******************** Performance Enahnce----------------------------------------[standard] Extreme Memory Profile (X.M.P.)----------------------------[Disabled] (G)MCH Frequency Latch-------------------------------------[AUTO] System Memory Muliplier(SPD)-------------------------------[2.40B] DRAM Timing Selectable-------------------------------------[MANUAL](5-5-5-15) ********************Mother Board Voltage Control****************** Load-Line Calibration--------------------------------------[Disabled] CPU Vcore--------------------------------------------------[1.41V] CPU Termination--------------------------------------------[AUTO] CPU PLL----------------------------------------------------[AUTO] CPU Reference----------------------------------------------[AUTO] MCH Core---------------------------------------------------[AUTO] MCH Reference----------------------------------------------[AUTO] ICH I/O----------------------------------------------------[AUTO] ICH Core---------------------------------------------------[AUTO] DRAM Voltage-----------------------------------------------[2.100V]

i'm trying so solve this problem and now i found this YouP-PAX youp|pax|YouP-PAX|PAX A4|PAX Fi - PC Audio Drivers & Application Mods - Inofficial solution for Audigy 2 under Vista !!! - powered by Discuz!

Yeah, sorry! I cant use my 7.1 system @ vista!!! Gonna buy a Xonar D2X!! thanks guys!

OFF: In case, everybody is talking about Vista 64/32, just one ask. Can you play games useing EAX(5.1/7.1) environment? Yesterday i insltalled WinVista32 and used CreAtive&Daniel's drivers and EAX doesn't work @ games! thanks!

Hi... That mess was not for you man! I dont know if the problem is about my FF ou something else but the link into Daniel's interview doesent link to anywhere, you have to cupy and past. But no problem! The problem is when you have to look for you need, a lot of especification in numbers and others. So you have to click in whitch one.! Thats fine! Thanks a lot! BUT... In CoD4, Max Payne 2, F.E.A.R., Assassin's Creed, Gears Of War... i couldn't hear my 5.1/7.1!!! The EAX doesn't works in games!!! So, i have my HT ah cant use that in winvista? tsc, tsc, tsc... Take a look: Every thing is fine, but when i need that palying...

Thanks guys! But thats a mess when you have to found what is for you sound card. I had to click in all links to see whitch one is for me! So... SB Live! series Vista Support Pack 2.10.0001A http://files.filefront.com/SBL+VTDRV+LB+2+...;/fileinfo.html Creative SB Audigy Series Vista Pack v2.15.0004EQ (with Equalizer) http://files.filefront.com/SBAX+PCDVT+LB+2...;/fileinfo.html SB X-Fi Xtreme Audio Windows Vista Pack 1.04.0078A http://files.filefront.com/XFXA+PCDRV+LB+1...;/fileinfo.html SB Audigy Value/SE/LS & Live! 24-bit Windows Vista Pack 1.04.0077B http://files.filefront.com/SB24+VTDRV+LB+1...;/fileinfo.html Gameport support pack fot Windows Vista 32-bit http://files.filefront.com/Gameport+Vistae...;/fileinfo.html Sound Blaster Audigy series Vista driver 2.10.0001.23 http://files.filefront.com/SBAXVSD+PCDRV+L...;/fileinfo.html

Hi guys... Yesterday i installed Windows Vista 32 and no problem till now! I went to www.creative.com to download the newest driver for my Audigy 2 ZS, and done! So i lost the CMSS 3D Stereo and when i started CoD4 i lost the 5.1 channel. Just play the front speakers, left, center right! The others(rear left and rear right) is mutted! \=[ Can any one help me or thats the is what is? thanks!

I'm useing for 5 years Anti-Vir Avira and i didn't have problem! Its free, update almost every day! Just install and forget it! www.free-av.com It is the fastest and one of most security!!!

Oh! Thanks iKillSteal! I really didnt know! Sorry "clgeigel"!! So, try to get this one, it's better for 1~2C! \=] Review AS5 vs Tuniq TX-2 http://www.extremeoverclocking.com/reviews...Compound_3.html Thanks iKill

Actually the best thermal paste is Artic Silver 5!

hi... in this case, is better you stay with Q66! Cause if you waana higher scores with E84, you have to put over 4Ghz, Even in some cases, the [email protected] is faster than E84/[email protected]! Take a look at this review: http://www.xbitlabs.com/articles/cpu/displ...00_9.html#sect0

I konw that, as i sad to "The Smith" he is just waiting! We can go over ~3.2Ghz with box heatsink but its to diferent than mu P5B! I got a tutorial and this weekend i have some work to do, so i will be back with more frequences and voltages! I did it with my E6300+Tt BT and got almost 100% OC over stock frequences here in Brasil witch is hottest than USA, Canada, or some country around!! In sumer we get almost 40C everyday, sometimes 42C or a little bit more! Now in autumn is better to this kind of work! \=] I got: E6300 [email protected](517*7)1.42v with my E6300+Tt BT(lapped, 13C less@FULL) FSB: 2048Mhz Mem: 1048Mhz 5-5-5-15 2.4v thanks!