Tiltentei06

Hello OCC. I am trying to find out if i can use two WD 1,5TB each in raid 0. My motherboard manual says: A raid array over 2TB can only be set as a data disk only. Does this mean that i can only use disks in raid 0 that is up to 1TB each? I'm not planing on using the raid 0 set up as OS disk. I simply want the transfer time when copying over to other disks reduced. I have a MB with sata 6gbs suport. Do you think using two identical in raid 0 will be nice to use when copying over large files to another set up of two disks in raid 0? Will the transfer time be reduced if i try out this?

sweet. The whole series of moh is realy nice. Going to buy it tomorrow then.

Hello members of occ. Im wondering if this pc game works with windows 7, or would i have to play it with vista?

I am currently using two xfx hd 5870. Im thinkign about getting the ZOTAC GeForce GTS 450 1GB AMP! for physX. Im getting 27k now for gpu in vantage performance, and 20500 gpu in High. How much better will my system perform with a 450 for physX? Is it worth it do you think.

I would defenetly go for the 6 core and oc it up to 4ghz. I had the phenomII x4 965 BE(140w) almost one year but had to RTM it. I now have the 1090T and i have it o.c to 4 ghz, and i have to say its a massive improvement. My 3dmark and vantage scores have jumped 5-6k after i got the 6 core cpu. The 6 core is also easy to o.c and have low temps. So the old x4 was a real botleneck for my system. . Intel cpu's are the best though. So if you are getting a complete new system i would get the 930-950 i7 and o.c it good. Or you could wait for the new intel cpu's releases that is coming soon.

Yeah i got under room temps on it now. shows up as 1.4v in cpuz. Il adjust it down a bit then, and run some tests . Cheers

Any suggestions about what voltage i should use for stock speeds. Heard the default voltage is 1.375, but maybe it can be pushed down to 1.2-1.3v ? Good replies might save me some time running different settings and torture tests.

Yeah exactly. That was my opinion too. I know that timing, volt, speed, manufacturer and software has a big difference when it comes to ram. You answeared my question well, ty.

I have discussed some with my friends about sdram memory 240pinn ddr3. If you have an intel 930 u run a tripple channel system, and if you have a phenom II x4 965 u have a dual channel system. My question for you here at occ is: Tripple channel memory and dual channel memory kits only means they have 3 (6)and 2 (4)sticks in each kit right? and the sticks are the same, but only the ammount is different? I could use 3 packs of dual kit(2x2gb) to use in a 930 system if i want, because the sticks are the same?. Or are the dual and tripple channnel sticks built different? Theres so many oppinions about this, so it would be nice to have this issue solved. I use a 2x2GB memory sticks on my phenom II x6 system, and they are from a kit with 3(totaly 6GB), and they work perfectly and have been tested.

Yeah i will. Just waiting for my new cpu. My old one was RTM. Gonna try and flash them with asus bios first.

I have two xfx hd 5870 cards, and i was wondering if the msi afterburner could be used for overklocking them?

theres reviews on it at corsair.com. It runs about 8-10 degrees colder then the H50 on full load and with a stock intel 980x

Hey im thinking about building custom watercooling. Can i use one swiftech http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=59_201&products_id=28303 on a quad radiator and a dual 120mm. Or will i need two pumps in a two loop system?

Ok thanks. I might try it if i get a cheap INTEL CORE 2 QUAD Q9550S 2.8GHZ 12MB 1333MHZ S-775

Both mbo's have 2.0 and i am using two 5870