Gustavss14

No. They are going to each of the connectors.

Hello guys, I'm sleeving my PSU Corsair Ax1200 and im stucked at the 24-pin. At 13-pin hole of the 24-pin there is a "powercord head" where two wires go out from. What would you guys recommend me to do? //Gustav

Hello OCC I'm going to sleeve my (AX1200) and 8 fans. i'm going to sleeve it 2/3 black and 1/3 red. How much MPDC sleeving and heatsrink will i need? http://en.mdpc-x.com/mdpc-sleeve/sleeve/sleeve-small-black.htm http://en.mdpc-x.com/mdpc-sleeve/sleeve/sleeve-small-red.htm http://en.mdpc-x.com/mdpc-sleeve/heatshrink/pre-cut-heatshrink-small-black.htm EDIT: Which of these screws is for mounting a radiator? http://en.mdpc-x.com/mdpc-mounting/screws.htm one of the sides of the raditor is mounted a fan, so i need 4 long screws for the side with the fan. And the other side i need short screws i guess. Which? http://www.google.dk/imgres?q=radiator+mounted+water+cooling&start=88&um=1&hl=da&rlz=1C1CHFX_en-gbDK474DK474&biw=1680&bih=949&tbm=isch&tbnid=9ySqBpfKAnHJmM:&imgrefurl=http://www.tomshardware.com/reviews/7-hot-water-cooling-systems-tested,883-16.html&docid=LpNduKIhfZGtmM&imgurl=http://img.tomshardware.com/us/2004/09/20/7_hot_new_water_cooling_systems_tested/swiftech_radiator.jpg&w=425&h=383&ei=gbxxUPbYBoXUtAaP0YCYCQ&zoom=1&iact=hc&vpx=533&vpy=589&dur=1986&hovh=213&hovw=237&tx=123&ty=122&sig=113739879977010313107&page=3&tbnh=143&tbnw=125&ndsp=46&ved=1t:429,r:40,s:88,i:132

Sounds good. Does anyone know which adapters needed?

Hello. I was thinking if these two GPU waterblocks, can be connected correctly together? http://www.google.dk/imgres?um=1&hl=da&sa=N&biw=1745&bih=882&tbm=isch&tbnid=7YMrQN8BY517XM:&imgrefurl=http://www.octeamdenmark.com/forums/koeb-og-salg/7767-s-ek-fc5870.html&imgurl=http://www.octeamdenmark.com/forums/attachments/koeb-og-salg/2537d1303598647-s-ek-fc5870-ek-fc5870_1.jpg&w=3648&h=2736&ei=VYs_UOP6E8mQswbL9IHwDw&zoom=1&iact=hc&vpx=1157&vpy=285&dur=289&hovh=133&hovw=174&tx=84&ty=83&sig=110529840417283730807&page=1&tbnh=121&tbnw=156&start=0&ndsp=43&ved=1t:429,r:15,s:0,i:117 and http://www.google.dk/imgres?um=1&hl=da&sa=X&biw=1745&bih=882&tbm=isch&tbnid=gdl8hwpgKSLfHM:&imgrefurl=http://www.pcmodd.com.ar/index.php%3Faction%3Dcarro/showProduct%26itmId%3D1216%26rbrId%3D85&imgurl=http://www.pcmodd.com.ar/resources/Bloques%252520VGA-Mother/12310%252520-%252520WAK%252520Aquacomputer%252520aquagratiX%252520%252520HD%2525205870%252520and%252520HD%2525205850%252520(RV870)/12310_0.jpg&w=600&h=400&ei=oos_ULKlMcT4sgbP04AY&zoom=1&iact=hc&vpx=831&vpy=146&dur=1361&hovh=183&hovw=276&tx=108&ty=93&sig=110529840417283730807&page=1&tbnh=117&tbnw=156&start=0&ndsp=42&ved=1t:429,r:4,s:0,i:80 Thanks

Hello guys. I have this waterblock for my i5-2500k http://www.pureoverclock.com/review.php?id=909&page=2 And i was thinking if i could replace the "head" with this one?: http://www.aquatuning.de/product_info.php/info/p10298_EK-Water-Blocks-TOP-Acetal---Supreme-HF.html So it become the same as?: http://www.aquatuning.de/product_info.php/info/p8201_EK-Water-Blocks-EK-Supreme-HF-Acetal--775-1156-1155-1oe-2011-AM2-AM3-939-XEON-.html btw: Do you know what the performce diffrence are?

You can: http://www.google.dk/imgres?um=1&hl=da&sa=N&rlz=1C1CHFX_en-gbDK474DK474&biw=1680&bih=925&tbm=isch&tbnid=5aD4yKbk13dt-M:&imgrefurl=http://www.overclockers.com/forums/showthread.php%3Ft%3D625468%26page%3D35&docid=Wvb6JTp7lCwPhM&imgurl=http://i24.photobucket.com/albums/c2/FatMaN007/WC%252520Mod%25252003-11/IMG_1337.jpg&w=533&h=800&ei=QFGxT4H2C9Dasgah0_nNBg&zoom=1&iact=rc&dur=386&sig=113739879977010313107&page=2&tbnh=141&tbnw=91&start=41&ndsp=50&ved=1t:429,r:31,s:41,i:225&tx=58&ty=70 Just a thin 120 rad

I'll go for that then With my motherboard it wont be a problem

Hey Guys. Im new at this forum and 'im from Denmark, so be patient with me I have bought a phantom and i have painted it and done some small moddings. Here are my thoughts: http://imageshack.dk//viewimage.php?file=/imagesfree/Wwk46721.png (How do i add a photo?) I'm going to upgrade with a 5970 soon for a trifire setup. Starting a build log soon. What do you think? any better ideas?

Maybe going for the 500R instead.

Hello which of these would you choose? Arc midi, phantom 410 or RV03?

The cheapest 7970 cost 750$ in Denmark http://www.komplett.dk/k/search.aspx?q=7970&bn=10488&mfr=

Are you sure?

Will it improve my music and sound effects in games a lot more than my onboard?

I'm playing a lot of music, counterstrike and battlefield 3. I have the Logitech Z906 5.1 speaker system. I would like to improve the sound of my music and the sound effects in my games. At this moment i have Sabertooth P67 B3 onboard sound.