Jump to content

seriousHUSTLE

Members
  • Posts

    22
  • Joined

  • Last visited

seriousHUSTLE's Achievements

Newbie

Newbie (1/14)

  1. hey guys i recently bought a HP dv6 6c38tx to play SWTOR on, it runs great with around 60fps however im unsure about the gpu temp. it gets up to about 85 degrees after playing for about an hour. Is this too high? or is it alright for the model of the card. Cheers.
  2. Ive tested them on x16/x16 and x8/x8, i still have the bottleneck problem, just my gpu score is slightly higher. I still dont understand how my cpu score is only 10.7k.. could the cpu be dodgy? im guessing not becuase everything runs fine, no random bsod etc. eitherway, when only one card is in my combined score goes up, so im guessing i need to wait for faster cpus haha.
  3. ok so i put the second 6990 back in, even cranked up my cpu to 5ghz, and i get http://3dmark.com/3dm11/1142386 pretty sure the cpu just cant handle them lol. i searched around for peoples 2600k scores, and they seem to be getting around the 10-11k mark when its oc.
  4. i removed on my of cards, and got P9416 http://3dmark.com/3dm11/1142092 im guessing even at 4.8ghz, the cpu just cant handle 2 6990's? :S hmmm.
  5. I have 16gb, 1600mhz timings are 7-8-7-24
  6. Hmmm I'm confused :s 3dmark is just reading the clock wrong, my CPU is clocked to 4.8ghz. Prime95 stable after 12hours, cpu-z is reading 4.8ghz.
  7. http://3dmark.com/3dm11/1048793 P12623 gpus arnt scoring as high as they should according to 3d, im guessing because they are both running in x8, not 16? (i have the p67a-ud7 but my revodrive x2 brings them back to x8)
  8. i got 8gbs, running at 1600mhz timings are 7-8-7-24
  9. its just strange it all runs fine, still overclocks. Just fails at the test lol
  10. so.. i reseated my h70, in the progress i decided to take the cpu out (dont ask why lol) as i lifted the cpu off the platform i noticed a few of the pins were bent.. and there were 2 that were completely snapped off. i did my best to straighten the bent ones, and here i am. On the same computer, everything still seems to be working. Anyway yes cpu-z was reading the correct overclock, im guessing the cpu isnt performing correctly due to the broken pins, hence the bad cpu scores?
  11. Ive currently got it clocked at 4.9ghz. During prime95 it hits 70c doesnt go higher after hours. However.. when i run 3dmark 11, i get really baaad cpu score. As if the overclock isnt even doing anything? confused :S
  12. yeah i am now haha, pretty sure i have found a stable 5Ghz clock. Need to run some more stability tests to be sure, currently running on air it was hitting 80c during prime95. Im going to hook up some water cooling and give it another go.
  13. turns out the auto tune is hopeless haha.
  14. thanks for the replies guys, i decided to install everything on my P8P67 deluxe instead.. too see how it performed on that. I used the asus auto tune program, it clocked the cpu to 4.9ghz. Temps sit around 35C idle on air (V8 coolermaster). IM guessing the asus boards are better for overclocking at this point in time? i havnt tried a prime95 test yet.
  15. Hey guys, so ive recently purchased and installed a Corsair H70 (to be honest, i expected better temps from it) and im still unable to overclock my 2600k past 4.6ghz. Once i hit that speed i seem to need alot of voltage, 1.5v + which the h70 cant seem to contain temp wise. I currently have it clocked to 4.5Ghz on "auto" voltage, with PLL overvoltage disabled. Im running this on the GA-P67A-UD7 mobo, with F3 bios. At idle the temps are between 30c -34c, During Prime95 the temps hit 74c. Is there anything im doing wrong? or do i just have a crappy chip? ive seen people hiiting 5ghz on air cooling, im guessing they just have the luck of getting an amazinf chip.
×
×
  • Create New...