Mokomaki

I dont think so. Its a normal black ATX case from 2003/2004.....with the PSU mounted at the top So no

Alright thanks. But remember that the only exhaust is a 120mm normal fan at the back of the case

Thinking of getting a blue LED 22cm case fan. I dont have any mounting places on my case but im probably going to cut a hole and make the screw holes myself. Onto the side panel of my ATX case. But my question is Should i set the fan to Exhaust or intake? If i place it too high up on the side panel wouldnt it interfere with CPU exhaust? But then again should i deliberatly place it quite high up and it could exhaust massive amounts of hot air from my case. the specs: Dimension: 220 x 220 x 30mm (170mm fittings) Fan speed: 600 RPM Airflow: 95.63 CFM (162.1m3/h)

Thankyou!

Okay what about a 550W Chieftec 80+ PSU.. for the same price as the 400W corsair one. Corsair has 30A on 12v and this one has 25A.. http://www.rwlabs.com/article.php?cat=&id=180&pagenumber=2

My budget is a low 280(translates to 360USD) Euros for: a Phenom II x2 555 A SB710 Mobo with ACC/core unlocker 2gb DDR3 RAM a case and the PSU.... So far with asrock m3a770de | 62.80e Phenom II x2 555 | 93.00e 2gb Kingston DDR3 1333mhz RAM | 43.10e Thermaltake V3 Black edition | 44.00e Corsair 400 watt <30A on 12V> | 51.00e (the chieftec 450w was 44 euros) its already 294 Euros... from the cheapest online store i could find. I live in Finland

Thats the exact same thing.. And the 450W has a amp of 18A on the 12V rail

Is http://extreme.outervision.com/psucalculatorlite.jsp accurate? if it is then my setup with 2 HDDs and a GT 220 would only require Minimum PSU Wattage: 216 W Recommended PSU Wattage: 266W Add a HD 5850 instead of the GT 220 and its Minimum PSU Wattage: 307 W Recommended PSU Wattage: 357 W With a mid range card like the 5770 the recommended wattage is 316 W

Is this PSU enough for these components? http://www.corsair.com/products/cx/default.aspx asrock m3a770de Phenom II x2 555 (Unlocking to quad if successfull) 2gb DDR3 1333mhz RAM 7200rpm SATA HDD GeForce GT 220 16x DVD drive 4x 120mm LED fans and 1x 120mm normal fan Also would it be enough if i wanted to do these things: Upgrade to 2x 2gb RAM Add a 2nd SATA HDD Upgrade to a mid/high end GPU edit: I would go with a 450Watt CHIEFTEC 80+ PSU but ive been told major brands like corsair are better? Although the corsair would fit the black interior of my Thermaltake V3 Black edition The BPS-500S http://www.chieftec.com/nitro-power.html

Yellow area = Some dried coffee. Tipped over my coffee cup on my desk and from the desk the coffee dripped onto my pc case and the case is alittle sticky inside. (pic taken from google btw. But its the exact same card)

Dried coffee on a small area of the GPU cant cause this right? ( Its sticky! :<)

I have this cheap GPU. http://www.palit.biz/main/vgapro.php?id=1236#spec In every site and store you can buy the card from the memory clock is 800mhz. http://www.gpureview.com/GeForce-GT-220-card-617.html But the HIGHEST that it allows me to even overclock it is to 480mhz.. from 400mhz What the? And why is my GPU memory DDR2(Says that on the box also) While its advertised everywhere as GDDR3?