How To Change Your Motherboard
Posted 06 January 2005 - 09:57 AM
this is NOT 100% true.
there are 4 methods I've used over the years that have worked wonders with windows NT, 2000, XP and even longhorn.
Method 1 is to a repair install from windows (overlay install NOT repair console)
Method 2 is a little more involved. so here goes:
With the OLD motherboard in your system go to device manager (right click My Computer, Mange, Device Manager).
select the IDE / ATAPI controller (this will not work if you're using a raid or SATA setup that is NOT part of the chipset... ie SIL, Promise, High Point or Adaptec).
update your drivers.
choose to select from list of compatible devices.
choose microsoft default.
shut down and replace motherboard
Method 3 is to choose a motherboard with the chipset (which includes the IDE controller) that is the same make as the previous board (NFII to NF3/4 or i845 to i925)
Method 4 is a little more involved. it requires a stand alone IDE controller card or SATA card for SATA drives (this is the same reason I use SCSI drives).
Install the controller card in the system.
Install the drivers for the card.
shut down system and replace motherboard.
move controller card to new system.
install chipset drivers for motherboard.
shut down and move drives from controller card to motherboard.
remove controller card
Posted 06 January 2005 - 10:17 AM
I was actually going to look for an old thread where someone had mentioned method 2 and that they learned it from you..
anyway , i just had to change mother boards for someone this morning i just did a repair install(method 1)
Ill try method 2 next time
Posted 06 January 2005 - 07:42 PM
Memory Mushkin 998995 Blackline 12GB 9-9-9-24
Motherboard MSI X58 Big Bang
Graphics ASUS GTX 580
Power Corsair AX 1200,
Monitor Gateway UXD3000, LG W3000H, ASUS VG236 x 3
Water Cooling By DangerDen & Swiftech
Follow OCC on
Posted 06 January 2005 - 07:56 PM
Edited by Bboy Satch, 06 January 2005 - 07:56 PM.
Posted 06 January 2005 - 10:05 PM
Posted 06 January 2005 - 10:32 PM
In all things said, this would probably cause a reactivation of Windows, which we as techs cannot legally do without either customer consent or without the customer present. My management would just say replace the motherboard and reinstall with customer consent.
Edited by FxXP, 06 January 2005 - 10:33 PM.
Posted 07 January 2005 - 01:18 AM
CPU: i5 2500k @ 4.2ghz
RAM: g.skill 8gb ares ddr3 1600
MOBO: ASUS P8P67 Deluxe
VID: EVGA GTX 770 4gb
SOUND: Auzen X-Fi Prelude
PSU: Seasonic X-560
HDD: Seagate 500gb :: Samsung 500gb SATAII :: Samsung 1tb :: Kingston 120gb SSD
CASE: Antec P280 w/window
COOLING: Panaflo 120x38mm medium-speed 2x :: 2x 120x25mm San Ace High-Speed :: Thermalright Venomous X/NB eloop b12-4
Posted 07 January 2005 - 02:15 AM
It will help to save a lot of time as I upgrade parts through the families PC's.
Keep on Foldin...
Posted 07 January 2005 - 02:18 AM
majority of the time I do a repair from CD - my record so far is 5 repairs (from mobo changes) on one OS install...
Posted 08 January 2005 - 07:59 AM
My main concern is obviously OS and data. FSB limit of mobo is throttling my cpu and ram and i'm all O/C'd out.
My first post here.
Many thanks to any respondents.
Overpaq'd in OZ.
Posted 11 January 2005 - 03:57 PM
Very noob question....can you explaine to me in more detail on how do do a repair, or overlay....i have tried this a few times...instead of doing a fresh install (because of various errors etc..) But when i press "r" to do the repair, i get to the screen where i dont know what to do...kind of like dos commands....
then, i just say...oh crap it and do a fresh install...
so if you can give me more info on this, it would help greatly...thx in advance....
evga 680i (p20 bios)
G.skill HZ (18.104.22.168.) 2v 900mhz
tuniq tower (idle 38c load 68c)
2*raptors 150's Raid0 OCZ Powerstream 600W
Lite-on cd/dvd combo SB Audigy2zs
xp pro sp2
Posted 11 January 2005 - 04:04 PM