Jump to content


Photo
- - - - -

overclocking radeon 7770 help.


  • Please log in to reply
4 replies to this topic

#1 rieds

rieds

    Member

  • Members
  • PipPip
  • 124 posts
  • Gender:Male

Posted 30 October 2012 - 11:17 AM

i just bought a radeon 7770 and was wondering if someone could help me out with a guide for overclocking and testing?
FX6100 @ 4776/ Antec Kuhler920 on Asus Sabertooth 990FX, 8gb Patriot Viper Xtreme DDR3 1866 4gb x2, MSI ATI Radion 5450 512mb, WD 500gb 7200 Sata 6, WD 7200 320gb Sata 6, OCZ Mod Xtreme Pro 500w, Thermaltake V3 Black.

#2 d6bmg

d6bmg

    BMG FTW!!

  • Members
  • PipPipPipPipPip
  • 4120 posts
  • Gender:Male

Posted 30 October 2012 - 11:31 AM

Which model to be exact?
Regardless of the model, you can always use MSI afterburner to monitor and overclock the card.

boozei.gif


#3 rieds

rieds

    Member

  • Members
  • PipPip
  • 124 posts
  • Gender:Male

Posted 30 October 2012 - 10:38 PM

its a HIS radeon hd 7770 ghz edition.
FX6100 @ 4776/ Antec Kuhler920 on Asus Sabertooth 990FX, 8gb Patriot Viper Xtreme DDR3 1866 4gb x2, MSI ATI Radion 5450 512mb, WD 500gb 7200 Sata 6, WD 7200 320gb Sata 6, OCZ Mod Xtreme Pro 500w, Thermaltake V3 Black.

#4 rieds

rieds

    Member

  • Members
  • PipPip
  • 124 posts
  • Gender:Male

Posted 15 November 2012 - 09:21 AM

the max voltage is set to 1.2v but when stress testing it never gets over 1.175. is it locked by the manufacturer perhaps?
FX6100 @ 4776/ Antec Kuhler920 on Asus Sabertooth 990FX, 8gb Patriot Viper Xtreme DDR3 1866 4gb x2, MSI ATI Radion 5450 512mb, WD 500gb 7200 Sata 6, WD 7200 320gb Sata 6, OCZ Mod Xtreme Pro 500w, Thermaltake V3 Black.

#5 Braegnok

Braegnok

    KCCO

  • Folding Member
  • 443 posts
  • Gender:Male
  • Location:Colorado USA

Posted 16 November 2012 - 07:25 AM

I would not recommend going much over 1.2V. The 28nm Cape Verde core with Hynix memory IC's used on your card are rated to 1250 MHz, set at 0.825V to 1.16V factory settings. Power Saving Technology will drop down to 300 MHz core / 150 MHz memory @ 0.825V while in 2D / idle, and 1.16V load.
If you use MSI afterburner you should max out at 1125 MHz core and 1300 MHz memory, But.. HIS iTurbo overclocking software will go to 1145 MHz core and 1565 MHz memory.
These cards run great CrossFired @ factory settings.

Edited by Braegnok, 17 November 2012 - 05:30 AM.

Intel Core i7-4960X

Asus Rampage IV Gene

Asus R9290-DC2OC-4GD5

G.SKILL F3-17000CL9Q-8GBZH

Intel 240GB SSD

Corsair Obsidian 350D

Corsair AX 860i

Corsair Hydro Series H100i

Windows 7 Pro 64-Bit