120 replies to this topic

[Knight_72]

Hi guys,

I thought of this idea to make a big comparison chart with all the load and idle temps you guys get .
This way , it would be easier for guys to see what temps different cpu's get on different cooler's and at different voltage's.
Lets make a chart for idle temps and a chart for load temps.
For idle, all you have to do is get any temp monitoring program (such as Core Temp ) and record the temp after about 5 minutes of sitting in the desktop with a screenshot (if you dont have a screenshot its still fine).
For load , run about 5 minutes of Prime 95 (remember to choose for 32bit or 64bit depending on your OS) and then record the temp with a screenshot.
State your temps (idle and load) with your cpu , with what your cpu voltage is , what cooler you have and your ambiant room temp (if you have a thermometer , most people dont)
And then I'll make a big chart for you guys which will be in the second post in the thread. I would post my temps but my pc is out of action at the moment .

So post your temps !

Edited by Nyt Ryda, 18 December 2010 - 11:23 PM.

[Knight_72]

Temperatures :

Intel :
Owenisbad : Core 2 Quad Q9550 @ 3.8ghz at 1.4v on Noctua NH-U12P
Load temp of 50c , idle of 34c and room temp of 17c

Boinker : Core I7 920 d0 @ 4.20Ghz at 1.35v with XSPC 430 Radiator, Swiftech Apogee XT, Swiftech MCP655 Pump, XSPC 2 bay res and Scythe UltraKaze Noise makers
Load temp on average of 70c and idle of 35c

El_Capitan : 1. i7 920 d0 @ 3.9GHz 1.3v | OCZ Freeze | Noctua NH-D14 | Max Temp = 72C
2. i7 920 d0 @ 4.0GHz 1.35v | OCZ Freeze | Noctua NH-D14 | Max Temp = 76C
3. i7 920 d0 @ 4.0GHz 1.35v | OCZ Freeze | Prolimatech Megahalems Rev. B with Noctua NF-P12 fans | Max Temp = 77C
4. i7 920 d0 @ 4.0GHz 1.35v | OCZ Freeze | Swiftech MCR220 Drive Series (120.2 rad with MCP350 pump and two 120mm Yate Loons) | Max Temp = 71C
5. i7 930 d0 @ 3.9GHz 1.2875v | OCZ Freeze | Swiftech MCR220 Drive Series (120.2 rad with MCP350 pump and two 120mm Yate Loons) | Max Temp = 68C
6. i7 930 d0 @ 4.0GHz 1.325v | OCZ Freeze | Swiftech MCR220 Drive Series (120.2 rad with MCP350 pump and two 120mm Yate Loons) | Max Temp = 70C
7. i7 950 d0 @ 4.37GHz 1.3875v | OCZ Freeze | Swiftech MCR220 Drive Series (120.2 rad with MCP350 pump and two 120mm Yate Loons) | Max Temp = 76C
8. i7 950 d0 @ 4.37GHz 1.3875v | OCZ Freeze | Swiftech MCR220 Drive Series (120.2 rad with MCP350 pump and two 120mm Yate Loons pushing at (5v) and two Noctua NF-P12's at ULNA (5v) pushing) | Max Temp = 75C
9. i7 950 d0 @ 4.37GHz 1.3875v | OCZ Freeze | Swiftech custom 120.2 rad with MCP655 pump and two push only 120mm Noctua NF-P12's at ULNA (5v) | Max Temp = 77C
10. i7 950 d0 @ 4.37GHz 1.3875v | OCZ Freeze | Swiftech custom 120.4 rad with MCP655 pump and four push only 120mm Noctua NF-P12's at ULNA (5v) and also cooling two overclocked GTX 460 1GB GPU's | Max Temp = 74C
11. i7 950 d0 @ 4.37GHz 1.3875v | OCZ Freeze | Swiftech custom 120.4 rad with MCP655 pump and eight push/pull 120mm Noctua NF-P12's at ULNA (5v) and also cooling two overclocked GTX 460 1GB GPU's | Max Temp = 72C

Speedcrazy : i7 930 @ 3.8ghz on Cooler Master Gemini II S with idle of 42C and Load of 83C at an ambiant of 18C

UT66 : Core 2 Duo E6600 @ 3ghz on Thermalright Ultra 120 with an idle of 32C and load of 42C

Qu4k3r : Core 2 Quad Q6600 @ 3.2ghz at 1.43v on OCZ Vendetta with AS Ceramique with an idle of 45C and a load of 68C

Iskout : Core 2 Duo E8400 @ 3.6ghz at 1.325v on Swiftech Ultima Apex liquid cooling at idle of 34C and load of 47C at ambiant of 25C
2. Core 2 Duo E8400 @ 4ghz at 1.29v on Swiftech Apogee XT, Swiftech MCP655, Swiftech Rad, Swiftech 120.2 Rad with 4x Yate Loon 120mm fans at idle of 30C and load of 44C

Dihartnell : Core 2 Duo E8500 @ 4.275ghz at 1.36v with Prolimatech megahalems (2x Noctua NF-P12 fans) at idle of 35C and load of 53C at a 24C ambiant

SpeedwayNative : i7 930 @ 4.315GHz on 1.424V on a 120.2 Black Ice Extreme II rad with an idle of 32C and load of 70C at an ambiant of 25C

KK_ : Intel Core 2 Quad Q8400 2.66 @ 3.01ghz
Cooler Master Gemini II s (Single fan)
Room temp- 25c
idle temp- 30c (38 on cores avg)
load temp-55c (60c on cores avg)
Vcore 1.3125

Boinker :
Stock: Intel Core I7 DO step @ 2.66ghz. 1.190v (auto) Vcore 1.350 Qpi W/ DDR3 1866 Corsair Dominator ram
Overclocked : Core I7 920 Do step @ 3.36Ghz. 1.190v (auto) Vcore 1.350 Qpi w/ Corsair Dominator 1855

Stock and overclocked on two HSF's. Between the two of them there may be something wrong with the nickel plated cooler but the tests are consistent so I'm going to have to say its ok as the data shows. It just does not have the thermal transfer that the pure copper unit does. keep in mind though the I7 never got a voltage bump to get to 3.36Ghz where the Overclock test was so they are not the best choice for an I7 but when put to the test they are able to cool them with a modest overclock inside of a well ventilated case. But, between the two... Get the all copper one. it not only Has better results but IMHO looks better.

Ambient temperature was 72f - 72.5f For all the tests.

Zalman CNPS9700 Nvidia nickel plated edition
Arctic silver 5 Stock: 43c idle - 66c load
Arctic silver 5 overclocked: 46c - 79c load
Zalman Paste Stock: 44c Idle - 74c load
Zalman Paste overclocked: 46c idle - 83c load

Zalman CNPS9700 Copper edition
Arctic silter 5 stock: Idle: 40c - Load: 61c
Arctic silver 5 Overclocked: Idle: 42c - load 72c
Zalman paste stock: Idle: 41c - Load 62c
Zalman Paste overclocked: Idle: 44c - Load: 75c

Final thoughts: I think the Nickel plated 9700 may be suffering from a not completely flat cold plate. But when using a small amount of tim to get the best performance The HSF would literally not make contact with the chip at all. though if you use AS5 this will not hinder performance terribly there is still going to be lost performance due to this issue.

Boinker : Tested out the Cooler Master Hyper 212+ On the Core I7 920 DO using AS5 Large grain of rice in center method.

Stock settings: all auto except The power saver settings are disabled, Multiplier set @ 21, and Bclk set to 133mhz
Overclocked settings: Bclk 181, Multi 21, Cpu Volts 1.300v, CPU PLL 1.88, QPI/Dram 1.381v, IOH 1.20, LLC on and that puts us @ 3.80Ghz

Stock - Idle: 44c
Load: 66c

Overclocked - Idle: 48c
Load: 85c

Without a second fan this cooler is capable of taking an I7 920DO up to 3.80Ghz @ 1.30v LLC with a final max load temp of 85c hottest.

i7 920 at 4.0ghz 1.386 qpi 1.30 vcore llc on. Load temps top out at 92c and idle its a cool 45c...

fivex1950 : i7-920 @ 3.8ghz with Coolmaster Hyper Z600 w/2-120mm push pull fans at an idle of 8C and load of 39C at an ambiant of very cold presumably

Nyt Ryda : i7 920 D0 @ 2.33GHz stock at stock voltage with Corsair H70 Push/Pull 2000rpm fans at idle of 32C and load of 50C at an ambiant of 24C
i7 920 D0 @ 3GHz at 1.192v with Corsair H70 Push/Pull 2000rpm fans at idle of 32C and load of 52C at an ambiant of 24C
i7 920 D0 @ 3.5GHz stock at 1.232v with Corsair H70 Push/Pull 2000rpm fans at idle of 33C and load of 58C at an ambiant of 24C
i7 920 D0 @ 3.927GHz at 1.272v with Corsair H70 Push/Pull 2000rpm fans at idle of 34C and load of 65C at an ambiant of 24C
i7 920 D0 @ 4GHz at 1.296v with Corsair H70 Push/Pull 2000rpm fans at idle of 35C and load of 68C at an ambiant of 24C
i7 920 D0 @ 4.158GHz at 1.3375v with Corsair H70 Push/Pull 2000rpm fans at idle of 40C and load of 80C at an ambiant of 25C


Krieg1337 : Xeon W3520 @ 3.6ghz at 1.25v with EK Supreme HF with White Top , EK White Full Waterblock on motherboard , MIPS White Corsair ram Waterblock , Swiftech MCP 355 with White Top , Swiftech MCR 220 and 4 Lian Li Fans , Black Ice GTX 240 with 4 Panaflo "High" at 23-24C ambient
Maximum of 55C on the hottest core and Idle was 34C on the hottest core

bschmidt71 : i7 965 C1 @ 3.857 Ghz at 1.3v with Heat Killer 3 CPU + 2x Heat Killer GPU Blocks, HW Labs GTX240 (2x) with 6x Noctua NF-P12 120mm fans (stacked rads), Boreas TEC
Idle: 35C
Room Temp : 25C
Load: 65C

Nyt Ryda :
i7 920 D0 at 4.4GHz at 1.425v on XSPC Rasa 750 block + X20 pump/res combo + XSPC RS360 rad with 5 fans
Idle : 34C
Ambiant : 17C
Load: 65C



AMD :

Cery25 : Phenom II X4 955 @ 3.8ghz at 1.375v on Thermaltake Frio
Load temp of 52c , idle of 30c at an ambiant of 20c

El_Capitan :
1. Phenom II x3 720 BE @ 3.4GHz 1.35v | OCZ Freeze | Stock Cooler | Max Temp = 53C
2. Phenom II x3 720 BE @ 3.6GHz 1.4625v | OCZ Freeze | ZALMAN CNPS 9700 NT | Max Temp = 54C
3. Phenom II x3 720 BE @ 3.6GHz 1.4625v | OCZ Freeze | Cooler Master Hyper 212+ and one push only 120mm Noctua NF-P12 at 12v | Max Temp = 56C
4. Phenom II x3 720 BE @ 3.7GHz 1.5125v | OCZ Freeze | Cooler Master Hyper 212+ and one push only 120mm Noctua NF-P12 at 12v | Max Temp = 61C
5. Phenom II x6 1090T @ 4.0GHz 1.45v | OCZ Freeze | Cooler Master Hyper 212+ and one push only 120mm Noctua NF-P12 at 12v | Max Temp = 52C
6. Phenom II x6 1090T @ 4.0GHz 1.45v | OCZ Freeze | Swiftech custom 120.2 Dual Stack rad with MCP655 pump and two sandwiched 120mm Noctua NF-P12's at LNA (7v) and also cooling one overclocked HD 5870 2GB GPU | Max Temp = 45C
7. Phenom II x6 1090T @ 4.0GHz 1.45v | OCZ Freeze | Swiftech custom 120.2 Dual Stack rad with MCP655 pump and two sandwiched 120mm Noctua NF-P12's at LNA (7v) with another two 120mm Noctua NF-P12's at LNA (7V) pulling, and also cooling one overclocked HD 5870 2GB GPU | Max Temp = 34C and Idle Temp = 15C
8. Phenom II x6 1090T @ 4.2GHz 1.5v | OCZ Freeze | Swiftech custom 120.2 Dual Stack rad with MCP655 pump and two sandwiched 120mm Noctua NF-P12's at LNA (7v) with another two 120mm Noctua NF-P12's at LNA (7V) pulling, and also cooling one overclocked HD 5870 2GB GPU | Max Temp = 42C and Idle Temp = 19C - This was at 240 x 17.5 (Note, odd squealing noise due to higher HT Link @ 2400.)
9. Phenom II x6 1090T @ 4.2GHz 1.5v | OCZ Freeze | Swiftech custom 120.2 Dual Stack rad with MCP655 pump and two sandwiched 120mm Noctua NF-P12's at LNA (7v) with another two 120mm Noctua NF-P12's at LNA (7V) pulling, and also cooling one overclocked HD 5870 2GB GPU | Max Temp = 37C and Idle Temp = 19C - This was at 200 x 21.0 (Note, no squealing noise with lower HT Link @ 2000.)

Joel.Monteiro : Phenom II X4 9950 @ 3ghz at stock voltage on Noctua NH-D14 with minimum of 39C and max of 55C

Nyt Ryda : 1. Phenom II X6 1090t @ 4ghz at 1.5v (cpu-z shows 1.5v but it is set to 1.45v in BIOS) on Corsair H70 Push/Pull 2000rpm fans with idle of 25C and load of 50C at ambiant of 28C
2. Phenom II X6 1090t @4.14ghz at 1.5v (cpu-z shows 1.5v but it is set to 1.45v in BIOS) on Corsair H70 Push/Pull 2000rpm fans with idle of 25C and load of 50C at ambiant of 28C
3. Phenom II X6 1090t @ 4.2ghz at 1.525v (cpu-z shows 1.525v but it is set to 1.475v in BIOS) on Corsair H70 Push/Pull 2000rpm with an idle of 25C and load of 51C at ambiant of 27C

Krieg1337 : Phenom II X4 955 @ 3.6ghz at 1.425v on Xigmatek 1283 with an idle of 38C and load of 58C at ambiant of 22C

Dihartnell : Phenom II X2 555BE unlocked overclocked to 4.05ghz at 1.5v with Noctua D14 with idle of 35C and a load of 45C with ambiant of 24C

Briggity : Phenom II X4 970 at stock 3.5ghz and stock voltage with Corsair H70 with idle of 35C and load of 36C

Cespenar : Phenom II X4 965 @ 3.84ghz with Vcore of 1.41 watercooled with Thermaltake Kandalf LCS case with P500 Thermaltake pump and res. Thermaltake CPU block that came with the case and Alphacool NexXxos rad also cooling two 8800GTX's with an idle of 53C and load of 58C in an ambient of 33C

Changwafu : Athlon X4 640 @ 3.55ghz at stock volts on stock cooler at 55C load

Smduff : AMD 1055T@4GHz 1.45v in BIOS Custom water (in sig) Ambient temps is set at 18C with idle of 23C and load of 44c

Clay : DFI Ultra-D XP 4000 @255X12 (3060) 24/7 for about three years. 460gtx 2Xraptors2 raid 0. Pa120.3 mcp655 Storm rev2 at an ambiant of 27C at idle 28C at load of 35C

immort41 : Athlon II X4 620 on stock cooler idle at 32C and max at 50C.

Zackhaf : AMD Phenom 9150e, 1.8GHz (no OC), stock cooling, (2) 120mms and (1) 80mm fan on the case .
Idle temp of 21C, High of 52C under full load at an ambiant of 20C

danieljury3 : AMD Athlon II X4 620 @ 3.3ghz & 1.375v
CoolerMaster Hyper 212+ with 2x CoolerMaster Sickleflow fans push/pull, an Antec 200mm on the top and 120mm exhaust, an Arctic cooling F12 on the front and a Silverstone on the side panel. My thermal paste is Arctic Cooling MX-3 applied with the double line method after filling the gaps between the heat pipes with paste.
At idle of around 25-30C and load of 36C.

AMD Athlon II X4 620 @ stock on stock cooler : At around 34c idle and 64C load .

[Owenisbad]

Core 2 Quad Q9550 @3.8 1.4v
Noctua NH-U12P

room temp - 17°c
Idle temp - 34°c
Load temp - 50°c

Attached Thumbnails

• 
• 

[SpeedCrazy]

Core i7 930 @3.8
Room Temp:22C
Idle Temp:
Load Temp: 76(average core temp)

I have a problem, no 2 temp monitors agree.
Do i trust my mobo manufacturers utility or a third party one? The difference is of about 10 degrees. out of the four i tried 2 were one end 2 the other end of that 10 degrees.

Edited by SpeedCrazy, 17 December 2010 - 10:31 AM.

[Knight_72]

Core i7 930 @3.8
Room Temp:22C
Idle Temp:
Load Temp: 76(average core temp)

I have a problem, no 2 temp monitors agree.

Go with core temp's results for average.
Can you name all the tools you used ?

Edited by Nyt Ryda, 17 December 2010 - 10:34 AM.

[SpeedCrazy]

Core temp, Asus Ai Suite, HW monitor, and the temperature readouts from occt.

[cery25]

p II x4 955 @ 3,8 ghz
room temp: 20 c
idle: 30 c
full load prime95: 52 c

[boinker]

Core I7 920 DO @ 4.20Ghz
Core Voltage 1.350
QPI voltage 1.400
On water cooling, please see sig.

Idle temp After 5 minutes core 0: 36c Core 1: 36c Core 2: 34c core 3: 33c.

Load temps on prime 95: Core 0: 70c Core 1: 68c Core 2: 68c Core 3: 65c

load temps under linpak occt: Core 0: 75c Core 1: 72c Core 2: 71c Core 3: 70c

Note: on linpak occt it thermal throttled to 4.00Ghz.

[Knight_72]

Core temp, Asus Ai Suite, HW monitor, and the temperature readouts from occt.

Take the 4 core temp's from Core Temp and I'll get the average

@cery25 : What voltage did you use on your 955 ?

UPDATED

[cery25]

Take the 4 core temp's from Core Temp and I'll get the average

@cery25 : What voltage did you use on your 955 ?

UPDATED

vcore-1.375

[El_Capitan]

I've had a various amount of set-ups, from the past to what I have currently. Some I don't have screenshots for, so you'll have to take me on my word. Also, no idle times, and max temp is 15 minutes of Prime95 for the HIGHEST core.

UPDATED

Intel (Monitoring with RealTemp):
1. i7 920 d0 @ 3.9GHz 1.3v | OCZ Freeze | Noctua NH-D14 | Max Temp = 72C
2. i7 920 d0 @ 4.0GHz 1.35v | OCZ Freeze | Noctua NH-D14 | Max Temp = 76C
3. i7 920 d0 @ 4.0GHz 1.35v | OCZ Freeze | Prolimatech Megahalems Rev. B with Noctua NF-P12 fans | Max Temp = 77C
4. i7 920 d0 @ 4.0GHz 1.35v | OCZ Freeze | Swiftech MCR220 Drive Series (120.2 rad with MCP350 pump and two 120mm Yate Loons) | Max Temp = 71C
5. i7 930 d0 @ 3.9GHz 1.2875v | OCZ Freeze | Swiftech MCR220 Drive Series (120.2 rad with MCP350 pump and two 120mm Yate Loons) | Max Temp = 68C
6. i7 930 d0 @ 4.0GHz 1.325v | OCZ Freeze | Swiftech MCR220 Drive Series (120.2 rad with MCP350 pump and two 120mm Yate Loons) | Max Temp = 70C
7.i7 950 d0 @ 4.31GHz 1.400v | OCZ Freeze | Swiftech custom 120.3 rad with MCP350 pump and six push/pull 120mm Noctua NF-P12's at ULNA (5v) = 65C
8. i7 950 d0 @ 4.37GHz 1.3875v | OCZ Freeze | Swiftech MCR220 Drive Series (120.2 rad with MCP350 pump and two 120mm Yate Loons) | Max Temp = 76C
9. i7 950 d0 @ 4.37GHz 1.3875v | OCZ Freeze | Swiftech MCR220 Drive Series (120.2 rad with MCP350 pump and two 120mm Yate Loons pushing at (5v) and two Noctua NF-P12's at ULNA (5v) pushing) | Max Temp = 75C
10. i7 950 d0 @ 4.37GHz 1.3875v | OCZ Freeze | Swiftech custom 120.2 rad with MCP655 pump and two push only 120mm Noctua NF-P12's at ULNA (5v) | Max Temp = 77C
11. i7 950 d0 @ 4.37GHz 1.3875v | OCZ Freeze | Swiftech custom 120.4 rad with MCP655 pump and four push only 120mm Noctua NF-P12's at ULNA (5v) and also cooling two overclocked GTX 460 1GB GPU's | Max Temp = 74C
12. i7 950 d0 @ 4.37GHz 1.3875v | OCZ Freeze | Swiftech custom 120.4 rad with MCP655 pump and eight push/pull 120mm Noctua NF-P12's at ULNA (5v) and also cooling two overclocked GTX 460 1GB GPU's | Max Temp = 72C
13. i7 2600K @ 4.8GHz 1.455 | Swiftech custom Dual Stack (2) 120.2 rads and two push/pull 120mm Noctua NF-P12's at ULNA (5v) with MCP655 and also cooling two overclocked HD 6970's | Max Temp = 74C
14. i7 2700K @ 5.0 GHz 1.440 | Swiftech custom 120.4 rad and 2 push, 4 pull 120mm Noctua NF-P12's and 120.1 rad and push/pull 120mm Noctua NF-P12's at ULNA (5v) with MCP655 and also cooling two overclocked GTX 580's and a GTX 460 1GB | Max Temp = 72C
15. CPU: i7 2700K @4.9 GHz w/HT 1.420 Vcore BIOS 3202; 1.416V - 1.424V CPU-Z | Maingear Epic T1000 + Swiftech Apogee XT 120.3 Push + Pull (5v) Max 67C Prime95
16. CPU: i7 2700K @5.0 GHz w/HT 1.460 Vcore BIOS 3202; 1.464V - 1.472V CPU-Z | Maingear Epic T1000 + Swiftech Apogee XT 120.3 Push + Pull (5v) Max 70C Prime95


AMD (Monitoring with CPUID Hardware Monitor):
1. Phenom II x3 720 BE @ 3.4GHz 1.35v | OCZ Freeze | Stock Cooler | Max Temp = 53C
2. Phenom II x3 720 BE @ 3.6GHz 1.4625v | OCZ Freeze | ZALMAN CNPS 9700 NT | Max Temp = 54C
3. Phenom II x3 720 BE @ 3.6GHz 1.4625v | OCZ Freeze | Cooler Master Hyper 212+ and one push only 120mm Noctua NF-P12 at 12v | Max Temp = 56C
4. Phenom II x3 720 BE @ 3.7GHz 1.5125v | OCZ Freeze | Cooler Master Hyper 212+ and one push only 120mm Noctua NF-P12 at 12v | Max Temp = 61C
5. Phenom II x6 1090T @ 4.0GHz 1.45v | OCZ Freeze | Cooler Master Hyper 212+ and one push only 120mm Noctua NF-P12 at 12v | Max Temp = 52C
6. Phenom II x6 1090T @ 4.0GHz 1.45v | OCZ Freeze | Swiftech custom 120.2 Dual Stack rad with MCP655 pump and two sandwiched 120mm Noctua NF-P12's at LNA (7v) and also cooling one overclocked HD 5870 2GB GPU | Max Temp = 45C
7. Phenom II x6 1090T @ 4.0GHz 1.45v | OCZ Freeze | Swiftech custom 120.2 Dual Stack rad with MCP655 pump and two sandwiched 120mm Noctua NF-P12's at LNA (7v) with another two 120mm Noctua NF-P12's at LNA (7V) pulling, and also cooling one overclocked HD 5870 2GB GPU | Max Temp = 34C and Idle Temp = 15C
8. Phenom II x6 1090T @ 4.2GHz 1.5v | OCZ Freeze | Swiftech custom 120.2 Dual Stack rad with MCP655 pump and two sandwiched 120mm Noctua NF-P12's at LNA (7v) with another two 120mm Noctua NF-P12's at LNA (7V) pulling, and also cooling one overclocked HD 5870 2GB GPU | Max Temp = 42C and Idle Temp = 19C - This was at 240 x 17.5 (Note, odd squealing noise due to higher HT Link @ 2400.)
9. Phenom II x6 1090T @ 4.2GHz 1.5v | OCZ Freeze | Swiftech custom 120.2 Dual Stack rad with MCP655 pump and two sandwiched 120mm Noctua NF-P12's at LNA (7v) with another two 120mm Noctua NF-P12's at LNA (7V) pulling, and also cooling one overclocked HD 5870 2GB GPU | Max Temp = 37C and Idle Temp = 19C - This was at 200 x 21.0 (Note, no squealing noise with lower HT Link @ 2000.)


Unfortunately with my 1090T, I have to use PhenomMSrTweaker with my motherboard in order for stable overclocks, which gives me higher Vcore. I also can't get higher than 4.2GHz due to this... or my 1090T just sucks.

Edited by El_Capitan, 06 June 2012 - 01:09 PM.

[joel.monteiro]

heres mine temp 9950X4 3.0Ghz stock volts,minimum ,maximum,cooler noctua d14